Broadata LB-H2-E User Manual - Page 6

Browse online or download pdf User Manual for Transmitter Broadata LB-H2-E. Broadata LB-H2-E 20 pages. Link bridge 4k uhd + audio embedder

Print Page

LB-H2-E User's Manual

Link Bridge 4K UHD+ Audio Embedder

2.0 OPERATION CONTROLS AND FUNCTIONS

1. POWER & POWER LED: Press this button to power the unit on

or off. The LED will be lit when the unit is receiving power.

Note: Press and hold the Power button for 3 seconds to perform

a factory reset. Release the button once the LEDs begin flashing.

2. LINK: This LED will illuminate to indicate that a live source has

been detected on the input port. When no source is detected

the LED will remain off.

3. AUDIO LOCK: The LED will illuminate when Audio has been

detected.

4. BYPASS/OPTICAL & L/R: This switch selects the source of

the audio to be embedded in the HDMI output. "BYPASS" passes

the audio directly from the HDMI input to the HDMI output

without modification. "OPTICAL" embeds the audio from the

optical S/PDIF audio input (LPCM 2.0 or bitstream). "L/R" em

beds the audio from the analog stereo inputs (LPCM 2.0 only).

5. SERVICE: This slot is for EDID management, control and

firmware update use. Connect directly to your PC/laptop using

a standard Mini-USB cable to connect using the PC software

or to send commands (via virtual COM port).

Broadata Technical Support, [email protected]