Avaya one-X 9611G Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for IP Phone Avaya one-X 9611G. Avaya one-X 9611G 9 pages. Ip deskphones h.323
Also for Avaya one-X 9611G: Specifications (2 pages), Quick Reference Manual (4 pages), Quick Reference Manual (2 pages), Manual (2 pages), Quick Reference (2 pages), Quick Reference Manual (2 pages), User Manual (7 pages), Quick Reference (3 pages), Quick Reference Manual (2 pages), Quick Reference (3 pages), Quick Reference (3 pages), Quick Reference (3 pages), User Manual (17 pages), Quick Reference (2 pages), Quick Reference (7 pages), Quick Start Manual (2 pages), Quick Start Manual (6 pages), User Manual (20 pages), Quick Reference (2 pages), Quick Reference (5 pages)

Print Page
Avaya one-X 9611G Instructions Manual
Placing a Call on Hold
Press the Hold softkey
HOLD
(The green light next to the line button flashes when the call is holding and the hold icon appears on your display.)
Retrieving the Held Call
Press the Resume softkey to retrieve the call
To Transfer a Call
TRANSFER
Sends a call from your extension
to another extension.
Setting up a Conference Call
CONFERENCE
The Conference feature allows
you to conference you and up to
five other parties on a call.
Using the Conference Button to Add A Held Call to An Active Call
Drop the Last Person Added to the Conference Call
Press the Drop softkey. The last party connected to the conference call is dropped from the call
Activate Call Forwarding

CALL FORWARDING

Forward all of your calls to
another number
Cancel Call Forwarding
Dial [*][7][3]
To have a Call Forward button programmed on your phone, contact the UW Technology Service Center at [email protected]
Activating and Deactivating Send All Calls

SEND ALL CALLS

Immediately sends all your calls
to your voice mail box
1.
During a call, press the Transfer softkey on the bottom of the display
(The call is automatically put on hold and the next available line becomes active)
2.
Dial the number to which you want to transfer the call
3.
Press the Complete softkey on the bottom of the display or the OK button to complete the transfer
(To stop the transfer and return to the caller, press the Cancel softkey or press the line appearance holding the original call.)
1.
While on the current call, press the Conf softkey (
2.
Dial the number of the next party
3.
Once the next party answers, press the Join softkey or the OK button to add the new party to the call
4.
Press the Add and repeat these steps to include additional parties on the conference call as needed (max. of six parties)
1.
While on an active call, press the Conf softkey (or Add if you are already in a conference)
2.
Select the call on hold that you want to add to the conference
3.
Press the softkey below Join (
You have successfully added two calls together)
1.
Dial [*][7][2]
2.
When you hear dial tone, enter the 5-digit extension number where calls should be forwarded to. To forward to an
off-campus number within the Greater Seattle Area, dial 9 + area code + 7-digit number
1. Press the Send All button. A checkmark will appear next to the feature and the Send Calls icon will appear in the
top left corner of your display
2. Press Send All button again to turn this feature off
The call is automatically on hold and the next available line becomes active.)
4