Corvus systems TRS-80 II Installation Manual - Page 13

Browse online or download pdf Installation Manual for Desktop Corvus systems TRS-80 II. Corvus systems TRS-80 II 19 pages. Corvus systems disk system installation guide

Print Page

INITIALIZA TION

FOR CP/M

This procedure will create CP 1M areas on the Corvus drive.

The floppy drives use volume A: and B:, volumes from C:

on are on the hard drive.

After initialization is completed

will be necessary to

run the CLINK program on each computer each time it is

turned on. The CLINK program you run depends upon the

model drive being used.

For the Model 6 run CLINK2FV

For

the

Model 11 run CLINK2TN

For the Model 20 run CLINK2TW

Before

initializing

your Corvus disk, copies of the

Corvus

TRS-80

Model

II Utility

diskettes should be made, using

the

PIP command.

Place

the CP 1M

Ver 2.2

diskette

the diskette drive.

Turn on

your

computer.

The screen displays:

CPIM for TRS-SO Model II

64K Version 2.2

On TRS-80 Model II computers with a single floppy

diskette drive, you will have to

let

the

computer

know that

the

CORVUS T2-H UTILITIES diskettes are

single-sided,

single-density format. This is done in a number of different

ways depending on the CP

software used. See the

specific instructions for the CP 1M system for your

computer. For example, with the Lifeboat version of CP 1M,

you will need to run a program called ONEDRIVE. First,