Broadata LBC-SPH4-1HB3-EIR Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Network Hardware Broadata LBC-SPH4-1HB3-EIR. Broadata LBC-SPH4-1HB3-EIR 18 pages.

Print Page

LBC-SPH4-1HB3-EIR User's Manual

Link Bridge

HDBaseT 3x Transmission System

6. SERVICE:

Reserved for manufacturer's use only

7. POWER LED:

The LED will illuminate when connected to an active power

supply.

8. DC 24V:

Connect the 24V DC power supply to the unit and plug the

adaptor into an AC outlet.

2.2 Rear Panel

1. IR IN:

Connect the supplied IR Receiver cable for IR signal

reception. Ensure that the remote being used is within direct

line-of-sight of the IR Extender.

2. IR OUT:

Connect the supplied IR Blaster cable for IR signal transmission.

Place the IR Blaster in direct line-of-sight of the equipment to

be controlled.

3. LAN:

Connect to an active network for LAN support. When any

compatible LAN equipped receivers are connected, this allows

the network access (including internet access if available) to

be shared. Connect any Ethernet equipped device e.g. a Smart

TV or game console to the LAN port of a receiver for that

device to share the network/internet access.

Warning: DO NOT connect the LAN connection with any of the

CAT5e/6/7 outputs, doing so may trigger a power shut down and

may damage the device.

Broadata Technical Support, (800) 214-0222