Gardena SmallCut Plus 350/23 Operation Instructions Manual - Page 6
Browse online or download pdf Operation Instructions Manual for Trimmer Gardena SmallCut Plus 350/23. Gardena SmallCut Plus 350/23 15 pages. Turbotrimmer
Also for Gardena SmallCut Plus 350/23: Operator's Manual (9 pages), Operator's Manual (6 pages)
Print Page
To start the trimmer:
1
0
To extend the cutting
filament (Tip mechanism):
4. MAINTENANCE
6
DANGER! Risk of physical injury!
Risk of injury if the unit does not stop when you
release the start button.
v Do not bypass the safety devices or switches. For example
do not attach the start button
To start:
v Push the start button
To stop:
v Release the start button
The tip mechanism operates when the motor operates. The best
result occurs only with the maximum cutting filament length.
During first operation, it can be necessary to extend the cutting
filament many times.
1. Start the unit.
2. Hold the trimmer head
parallel to the ground and
briefly tap the trimmer head
onto a solid surface
2
(prevent constant pressure
for extended periods).
The cutting filament
matically extended with a mecha-
nism that can be heard and
adjusted to the correct length
5
with the filament limiter
If necessary tap many times again
and again.
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v Before you maintain the unit, make sure that the mains
cable is disconnected.
to the handle.
0
on the top part of the handle
0
.
0
2
2
5
is auto-
5
q
.
q
.
1