Gardena SmallCut Plus 350/23 Operator's Manual - Page 7
Browse online or download pdf Operator's Manual for Trimmer Gardena SmallCut Plus 350/23. Gardena SmallCut Plus 350/23 9 pages. Turbotrimmer
Also for Gardena SmallCut Plus 350/23: Operation Instructions Manual (15 pages), Operator's Manual (6 pages)
Print Page
7. TECHNICAL DATA
Turbotrimmer
Unit
SmallCut 300/23
(Art. 9805)
Motor power consumption
W
300
Mains voltage /
V / Hz
230 / 5
Mains frequency
Cutting filament thickness
mm
1.6
Cutting width
mm
230
Cutting filament supply
m
6
Cutting filament feed
Tip mechanism
rpm
13,000
Rpm of filament cassette
Weight
kg
1.6
83
Sound pressure level L
1)
dB (A)
PA
Uncertainty k
3
PA
Sound power level L
2)
WA
92 /94
measured/guaranteed
dB (A)
Uncertainty k
2.04
WA
Hand/arm vibration a
4.3
1)
m/s
2
vhw
2.2
Uncertainty k
a
Measuring process complying with:
EN 50636-2-91
1)
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of expo-
sure. The vibration emission value can vary during actual use of the electric
power tool.
8. ACCESSORIES
GARDENA Filament Cassette for Turbotrimmers
9. SERVICE / WARRANTY
Service:
Please contact the address on the back page.
Warranty:
In the event of a warranty claim, no charge is levied to you for the services
provided.
GARDENA Manufacturing GmbH offers a two-year warranty (effective
as of the date of purchase) for this product. This warranty includes all
significant defects of the product that can be proved to be material or
manufacturing faults. This warranty is fulfilled by supplying a fully functional
replacement product or by repairing the faulty product sent to us free
of charge; we reserve the right to choose between these options. This ser-
vice is subject to the following provisions:
• The product was used for its intended purpose as per the recommenda-
tions in the operating instructions.
• Neither the purchaser nor a third party has attempted to repair the
product.
This manufacturer's warranty does not affect warranty entitlements against
the dealer / retailer.
If problems arise with this product, please contact our Service depart-
ment or send the defective product along with a brief description of the
fault to GARDENA Manufacturing GmbH, making sure to have sufficiently
covered any shipping costs and to have followed the relevant postage
and packaging guidelines. A warranty claim must be accompanied by
a copy of the proof of purchase.
Consumables:
The filament cassette and cassette cover are consumables and are not
included in the guarantee.
SmallCut Plus 350/23
(Art. 9806)
350
230 / 50
1.6
230
6
Tip mechanism
13,000
1.8
83
3
92 /94
2.32
4.3
2.2
RL 2000/14/EG
2)
Art. 5307
9