Makita VR003G Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Power Tool Makita VR003G. Makita VR003G 17 pages. Cordless concrete vibrator
Also for Makita VR003G: Instruction Manual (17 pages), Instruction Manual (17 pages)

Print Page

If the coupling does not reach or fit securely onto the

male thread of the tool, especially when installing a long

flexible shaft, pull the outer casing further towards the

tool while hand-turning the flexible core shaft so the

shaft top well fits into the shaft slot in the vibration head

and becomes fully engaged.

Fig.20

► 1. Outer casing 2. Flexible core shaft

Knock each of the three corners of triangular

coupling with a hammer a few times in random order to

secure assembly.

Fig.21

Uninstallation

Follow the installation steps in reverse order.

Installing shoulder strap

Optional accessory

WARNING:

Always remove the shoulder strap

from the tool while wearing portable power packs.

Wearing multiple harnesses and straps may impair

the chances to take the equipment off quickly in a

case of emergency and result in personal injury.

WARNING:

Do not use the parts for attaching

the shoulder strap for other purposes, such as

the fall prevention at high location. If the parts

for attaching the shoulder strap are used for other

purposes, excessive load may break them and cause

serious injury to the operator and person around/

underneath the operator.

shoulder strap to the tool securely. If the hooks are

attached incompletely, they may come off and cause injury.

dedicated to this tool. Using other shoulder strap

may cause an injury.

Hang the hooks of the shoulder strap over the hanging

holes on top of the tool.

Fig.22

► 1. Shoulder strap 2. Hook 3. Hanging hole

OPERATION

shoulder, and hold the tool firmly with both

hands.

NOTICE:

flexible shaft tends to vibrate at a higher ampli-

tude. The tool will restore the normal amplitude

after you squeeze and release the switch trigger a

few times repeatedly.

Make sure to throw in and keep the vibration head

stand straight during operation. Use the tool within the

effective vibration ranges at equidistant intervals. The

effective air bubble removal range is approximately ten

times the diameter of vibration head.

Fig.23

12 ENGLISH

CAUTION:

Be sure to attach the hooks of the

CAUTION:

Be sure to use the shoulder strap

CAUTION:

Put the shoulder strap on the

At the very beginning of operation, the