Gardena Flex Operator's Manual - Page 6
Browse online or download pdf Operator's Manual for Lawn and Garden Equipment Gardena Flex. Gardena Flex 18 pages.
Also for Gardena Flex: Operator's Manual (16 pages), Operator's Manual (15 pages), Operator's Manual (16 pages)
Print Page
A video of the
commissioning
and setting
processes is
available here:
2. INITIAL OPERATION
3. FUNCTION
v (Fig. F)
The settings can be adjusted when the control
panel is removed. You can change the settings
or move to the next setting by turning the outer
wheel. Pressing the
respective input. Pressing the button for a mini-
mum of 3 seconds locks or unlocks the display.
Time
Connecting
Sensor
SET
sensor
Start Time
(0 – 23) hrs (0 – 59) min.
Run Time
(0 – 29) sec.
(0 – 99) min.
ON
Frequency
4, 6, 8, 12, 24,
ON
48, 72 hrs
6
v (Fig. A – D)
button confirms the
Active
Watering
Battery
Condition *
Sensor
Sensitivity
The number of
drops represents
min
sec
the measured
soil moisture.
hrs
OFF
Timeplan
active /
deactive
*
max. 1 year
min. 4 weeks
4. PROGRAMMING
Fig. G:
1 Set time (hours) | 2 Set time (mins) |
3 Select schedule | 4 Confirm schedule
Fig. H:
Set = Sensor connected
Fig. I:
1 Active watering | 2 Change watering duration |
3 Stop active watering at any time
The saved watering schedule can be activated or
deactivated by pressing on / off. By pressing the
button, manual watering can be started or
stopped at a desired time (see fig. I ).
Watering tip: For pot plants that required small
amounts of water at regular intervals, short water-
ing cycles are ideal in combination with a drip
irrigation system.
Connect soil moisture sensor (optional) fig. D:
After a sensor has been connected, the "set sen-
sor" display will appear. By selecting 3-drip / 0-drip
the sensor response will be activated / deactivated.
After successful activation, the "set" display will
disappear (see fig. H).
If the soil is sufficiently moist, watering will be
immediately stopped or prevented.
max. 4 weeks
too weak for opening again
v (Fig. G – I)