Gardena 8885 Operating Instructions Manual - Page 6

Browse online or download pdf Operating Instructions Manual for Power Tool Gardena 8885. Gardena 8885 15 pages. Accu shears
Also for Gardena 8885: Operating Instructions Manual (9 pages), Operating Instructions Manual (15 pages), Operating Instructions Manual (16 pages), Operating Instructions Manual (16 pages), Operating Instructions Manual (10 pages), Operating Instructions Manual (15 pages), Operating Instructions Manual (17 pages), Operating Instructions Manual (16 pages)

Gardena 8885 Operating Instructions Manual
LED Accu Battery
Display Level:

5. Operation

WARNING!
Risk of Injury!
Cut grass / shrubs:
8
7
5
6
8
7
Telescopic Swivel Handle
Art. 8899 (optional):
9
45°
90°
0
135°
-135°
180°
16
After each switch-off of the Accu Shears, the charge level of the
battery is shown for approx. 20 sec.
LED lights up green: Accu is fully charged.
LED lights up yellow: Accu is half-full.
LED lights up red:
There is a risk of injury if the switching devices installed
on the Shears are removed or bridged (e. g. by fastening the
on switch to the handle). This prevents the Accu Shears
switching off automatically.
v Never remove or bridge the switching devices.
The starting lockout
being switched on unintentionally.
1. Grass Shears:
Clear the area to be cut of stones and other solid objects and
remove the blade guard
Accu Shrub Shears:
Remove the blade guard
2. Ergonomic design ComfortCut:
Press elbow joint
with blade to desired angle.
6
3. Cutting:
Disengage the starting lockout
and press the ON button
5
again.
The GARDENA Telescopic Swivel Handle Art. No. 8899 for the
Accu Shears can be mounted in 45° steps. The swivel handle is
fully height adjustable (85 – 120 cm) and can be adapted to suit
your height.
v S lide blade protection
-45°
Fitting the Telescopic Swivel Handle:
v G uide the swivel handle
-90°
holder of the Accu Shears until the lock engages.
Removing the Telescopic Swivel Handle:
v P ress the release button
The starting lockout
no longer function when the swivel handle is mounted.
Accu is empty and must be recharged.
prevents your GARDENA Accu Shears from
7
from the cutting blade.
5
from the cutting blade.
5
on both sides and adjust motor housing
6
by pushing it forwards
7
. Release the starting lockout
8
onto shear blade.
5
at the desired angle into the handle
9
and pull out the swivel handle.
0
and ON button
on the Accu Shears
7
8
7