Makita 6093DW Instruction Manual - Page 7
Browse online or download pdf Instruction Manual for Drill Makita 6093DW. Makita 6093DW 16 pages. Equipped with electric brake 10 mm (3/8") with fast charger
Also for Makita 6093DW: Instruction Manual (17 pages)
Print Page
• If youwish to charge twobattery c artridges, allow 15minutes between chargings
onthe
fast c harger.
Installing or removing drill bit or driver bit
CAUTION:
Always be sure that the tool is switched off and the battery
cartridge is removed before
installing or removing the bit.
To install
the bit,
place it in the chuck as
far as it will go. Tighten
the chuck
by hand.
Place the chuck
key
in each of the three
holes
and
tighten
clockwise.
Be sure
to
tighten
all three chuck
holes evenly.
To
remove
the
bit,
turn
the
chuck
key
counterclockwise
in just
one
hole,
then
loosen the chuck
by hand.
Chuck
key
After
use,
return
the
chuck
key
to the
storage cavity
on the tool.
Chuck
key
Holding
tool
Hold the tool
as shown
in the figure.
When
drilling
a large
diameter
hole,
hold
the tool
firmly
with
both
hands.