Gardena 8893 Operating Instructions Manual - Page 2

Print Page

Gardena 8893 Operating Instructions Manual

GARDENA Accu Shears ClassicCut / ComfortCut

Translation of the original German operating instructions.

Please read the operating instructions carefully and observe the

notes given. Use these operating instructions to familiarise your-

self with the product, the proper use and the safety instructions.

For safety reasons, children and young people under the age

of 16, as well as people not familiar with these operating

instructions, may not use this product. Persons with reduced

physical or mental abilities may use the product only if they are

supervised or instructed by a responsible person.

v Keep these operating instructions in a safe place.

Contents:

1. Area of application of your GARDENA Accu Shears . . . . . . . 12

2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3. Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4. Initial Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6. Putting into Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

8. Trouble-Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

9. Available accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

10. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

11. Service / Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1. Area of application of your GARDENA Accu Shears

Proper use with Grass and

The GARDENA Accu Grass Shears are suitable for cutting lawn

Boxwood Blade:

edges, smaller grass areas and for precise shaping of shrubs,

in particular boxwood, for the private home or hobby garden.

Proper use with Shrub Blade:

The GARDENA Accu Shrub Shears are intended for cutting

individual bushes, shrubs and climbing plants in private domestic

and hobby gardens.

DANGER!

The Accu Shears may not be used for chopping in the sense

Risk of injury!

of composting.

With the Shrub Blade Art. 2342 / 2343, the Accu Shears are

not suited for cutting lawns / lawn edges.

2. Safety instructions

v Please note the safety instructions on the Accu Shears.

WARNING!

v Please read the operating

instructions before using

this tool.

WARNING!

v Do not use in rain or wet

conditions.

DANGER!

Cutting tool continues to run

after switching off!

DANGER!

v Keep bystanders

away.

General Power Tool Safety Warnings

WARNING! Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, fire and / or serious injury.

Save all warnings and instructions for future

reference. The term "power tool" in the warnings

refers to your mains operated (corded) power tool

or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any

adaptor plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medi-

cation. A moment of inattention while operating

power tools may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard had, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and /or battery pack, picking

up or carrying the tool.

Carrying power tools with your finger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tools may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and /or the battery pack from the power tool

before making any adjustments, changing acces-

sories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool's operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions, taking

into account the working conditions and the

work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

5. Battery tool use and care

a) Recharge only with the charger specified by

the manufacturer.

A charger that is suitable for one type of battery

pack may create a risk of fire when used with

another battery pack.

b) Use power tools only with specifically

designated battery packs.

Use of any other battery packs may create a risk of

injury and fire.