Gardena 11120-20 Operator's Manual - Page 4

Browse online or download pdf Operator's Manual for Paint Sprayer Gardena 11120-20. Gardena 11120-20 5 pages. 1,25 l

Print Page

Operation:

CAUTION: The tank may only be filled with a maximum of 1.25 litres

liquid. Inspect the Pressure Sprayer visually before each use. Never leave your

Pressure Sprayer unattended or for long periods when full and pressurised.

Keep the unit out of the reach of children. You are responsible for the safety

of others. Keep your Pressure Sprayer away from heat sources and hot

environments. Screw on the spray nozzle

(7)

(Fig. O1) is positioned correctly.

and ensure that the O-ring

Cleaning:

Release the pressure after each use, empty the container, clean it carefully and

rinse with clear water. Then leave the pressure sprayer open and allow it to

dry. Do not dispose of residual fluids in the sewerage system (local disposal

systems). Always clean the Pressure Sprayer before using a different product

to avoid chemical reactions. When using several Pressure Sprayers, the tanks

and spray nozzle may not be exchanged between them. We recommend

that you have your Pressure Sprayer thoroughly inspected (preferably at

a GARDENA Service Centre) after using it for 5 years.

Storage:

Before storing, loosen the tank cap and always empty your Pressure Sprayer

completely (also after cleaning with water). Store away from frost.

Carry the pressure sprayer by the handle

2. OPERATION

Please observe the safety and proportioning instructions provided by the

manufacturer of the product you are going to spray.

To spray the liquid [Fig. O1/O2/O3 ]:

1. Push the safety relief valve

(6)

(1)

or the dosing cap

2. Unscrew the spray head

3. If necessary, fill in an additive via the dosing cap

(Scale

(12)

with 10 and 20 ml).

(1)

or dosing cap

4. Screw the spray head

(3)

5. Pump with the pump handle

6. Adjust the spray jet (clockwise rotation v spray mist; counterclockwise

rotation v spray jet) and the spray angle via the nozzle

(5)

7. Push the button

to spray the liquid.

3. MAINTENANCE

To clean the pressure sprayer:

Always clean your Pressure Sprayer after spraying. Use the Pressure Sprayer

only with clear water (possibly with addition of dish detergent) and spray empty.

The valves, the suction hose and the nozzle

outer dirtying of cover and tank, thoroughly clean the area thread and thread-

(7)

O-ring

4. STORAGE

To put into storage:

v Clean the pressure sprayer (see 3. MAINTENANCE).

5. TROUBLESHOOTING

To clean the filter [ Fig. O1 ]:

(10)

v Remove the filter

from the suction hose and clean it.

Problem

Possible Cause

Pump does not build up

Spray nozzle

pressure

too lightly screwed on.

Pump pipe

(7)

O-Ring

positioned.

Sealing cap

defective.

(4)

Pressure Sprayer does not

Nozzle

spray although there is

(10)

Filter

sufficient pressure or only

sprays with a weak spray jet

It is difficult to open and

Container pressure too high.

close the container

NOTE: For any other malfunctions please contact the GARDENA service

department.

(1)

tightly by hand (do not use tools)

(13)

and not by the pump handle

(11)

and fill the container

(11)

back onto the container.

(4)

are cleaned. In the case of

Remedy

(1)

(11)

or cap

v Screw on spray nozzle

or cap

(11)

on tighter.

(8)

is loose.

v Screw on pump pipe

tighter.

is not correctly

v Check correct position of

(7)

O-Ring

(9)

is dirty /

v Clean / exchange sealing

(9)

cap

is blocked.

v Unscrew nozzle

(10)

is clogged.

v Remove filter

suction hose and clean it.

v Release the container pres-

sure completely by means of

the safety relief valve

6. SERVICE / WARRANTY

(3)

(2)

(1)

(8)

(4)

and clean.

from the

(6)