Gardena 814 Operating Instructions - Page 3
Browse online or download pdf Operating Instructions for Paint Sprayer Gardena 814. Gardena 814 4 pages. 1,25 l
Also for Gardena 814: Operating Instructions (4 pages), Operating Instructions (4 pages)
GARDENA Pressure Sprayer 1,25 l
Translation of the original German operating instructions.
Please read the operating instructions carefully and observe
the notes given. Use the instructions to familiarise yourself
with the Pressure Sprayer, its proper use and the notes on
safety. For safety reasons, children under 16 as well as
persons not familiar with these operating instructions must
not use the Pressure Sprayer. Never operate the product
when you are tired, ill or under the influence of alcohol,
drugs or medicine.
Keep these operating instructions in a safe place.
1. Area of application of your GARDENA Pressure
Sprayer
Intended purpose:
The GARDENA Pressure Sprayer is intended for distributing
solventfree liquid pesticides
window cleaners
1)
, and car wax
allotments. It must not be used in public places, parks,
sport arenas, or in agriculture or forestry. Compliance with
the operating instructions provided by the manu facturer is
a prerequisite for using the Pressure Sprayer correctly.
1)
In accordance with the laws governing the use of pesticides and detergents,
only authorised substances may be used (authorised specialist shop).
Please note:
Due of the risk of physical injury, the GARDENA Pressure
Sprayer must not be used for spraying substances other
than those specified by GARDENA.
Also, no acids, disinfectants or impregnators, aggressive and
solventcontaining cleaning agents, petrol or spray oil may
be sprayed. We recommend that you only use pesticides
approved by the BBA (German Federal Biological Research
Centre for Agriculture and Forestry). To our knowledge at the
time of manufacturing the unit, the pesticides approved by
the BBA will not damage the materials used to construct the
Pressure Sprayer. When spraying insecticides, herbicides
and fungicides or other liquid plant protection products,
you must comply with all special pre cautionary measures
specified by the manufacturer of the product you are using.
2. Safety instructions
Danger of physical injuries:
Never open the Pressure Sprayer or unscrew the nozzle
when the Pressure Sprayer is still pressurised. To prevent
injury, never connect the Pressure Sprayer to an aircom
pressor. Always hold Pressure Sprayer upright before the
safety valve
(Fig. A3) is pressed. Before each opening
6
of the Pressure Sprayer, thoroughly release pressure by
pressing the safety valve.
Danger! Small parts could be swallowed during
assembly and there is a risk of suffocation from the
polybag. Keep infants away during assembly.
Operation:
Inspect the Pressure Sprayer visually before each use. Never
leave your Pressure Sprayer unattended or for long periods
when full and pres surised. Keep the unit out of the reach of
children. You are responsible for the safety of others.
Keep your Pressure Sprayer away from heat sources and hot
environments. Screw on the spray nozzle
(do not use tools) and ensure that the Oring
positioned correctly.
Cleaning:
Release the pressure after each use, empty the container,
clean it carefully and rinse with clear water. Then leave the
pressure sprayer open and allow it to dry.
Do not dispose of residual fluids in the sewerage system
(local disposal systems). Always clean the Pressure Sprayer
before using a different product to avoid chemical reactions.
When using several Pressure Sprayers, the tanks and spray
nozzle may not be exchanged between them.
Storage:
Before storing, loosen the tank cap and always empty your
Pressure Sprayer completely (also after cleaning with water).
Store away from frost.
3. Operation
Please observe the safety and proportioning instructions
provided by the manufacturer of the product you are going
to spray.
A1 Unscrew spray nozzle
WARNING: The tank may only be filled with
a maximum of 1.25 litres liquid.
A2 Pump using the handle
4
1)
, herbicides
1)
, fertilisers
1)
,
1)
in domestic gardens and
tightly by hand
1
(Fig. A1) is
7
and fill tank
.
1
2
.
3
A3 Set mist spray via the nozzle
Press operating tab
5
4. Cleaning
Cleaning the Pressure Sprayer:
Always clean your Pressure Sprayer after spraying.
Use Pressure Sprayer only with clear water (possibly with
addition of dish detergent) and spray empty. Use Pressure
Sprayer only with clear water (possibly with addition of dish
detergent) and spray empty. The valves, the suction hose
and the nozzle
are cleaned. In the case of outer dirtying
4
of cover and tank, thoroughly clean the area thread and
threadOring
. We recommend that you have your
7
Pressure Sprayer thoroughly inspected (preferably at
a GARDENA Service Centre) after using it for 5 years.
5. Trouble-Shooting
A1 Cleaning the filter:
v Remove filter
from suction hose and clean it.
0
Problem
Possible Cause
Pump does
Spray nozzle
not build up
too lightly
pressure.
screwed on.
Pump pipe
loose.
ORing
not correctly
positioned.
Sealing cap
defective.
Pressure Sprayer
Nozzle
does not spray
blocked.
although there
Filter
0
is sufficient pres-
clogged.
sure or only
sprays with a
weak spray jet.
It is difficult to
Container pres
open and close
sure too high.
the container.
If you have any other problems with your Pressure Sprayer
please contact GARDENA Customer Service.
6. Putting into Storage
Storing your Pressure Sprayer:
1. Clean the Pressure Sprayer (refer to 4. Cleaning).
2. Keep your Pressure Sprayer in a place protected from
frost.
7. Technical data
Max. capacity
Permissible working pressure
Max. permissible operating temperature
8. Warranty
In the event of a warranty claim, no charge is levied to you
for the services provided. GARDENA Manufacturing GmbH
offers a twoyear warranty (effective as of the date of pur
chase) for this product. This warranty includes all significant
defects of the product that can be proved to be material or
manufacturing faults. This warranty is fulfilled by supplying
a fully functional replacement product or by repairing the
faulty product sent to us free of charge; we reserve the right
to choose between these options. This service is subject to
the following provisions:
The product was used for its intended purpose as per the
recommendations in the operating instructions. Neither the
purchaser nor a third party has attempted to repair the prod
uct. This manufacturer's warranty does not affect warranty
entitlements against the dealer / retailer. If problems arise
with this product, please contact our Service department
or send the defective product along with a brief description
of the fault to GARDENA Manufacturing GmbH, making sure
to have sufficiently covered any shipping costs and to have
followed the relevant postage and packaging guidelines.
A warranty claim must be accompanied by a copy of the
proof of purchase.
:
4
and spray liquid.
Remedy
Screw spray
1
nozzle
on
1
tighter.
is
Screw on pump
8
pipe
tighter.
8
is
Check correct
7
position of
ORing
.
7
is
Exchange sealing
9
cap
.
9
is
Unscrew nozzle
4
and clean.
is
Remove filter
and clean it.
Release the
container pressure
completely by
means of the
safety valve
6
1,25 l
3 bar
40 °C
4
0
.