Gardena 822 Operating Instructions - Page 3

Browse online or download pdf Operating Instructions for Paint Sprayer Gardena 822. Gardena 822 4 pages.
Also for Gardena 822: Operating Instructions (4 pages), Operating Instructions (4 pages)

Gardena 822 Operating Instructions
GARDENA Pressure Sprayer 5 l
Translation of the original German operating instructions.
Please read the operating instructions carefully and observe the notes
given. Use the instructions to familiarise yourself with the Pressure
Sprayer, its proper use and the notes on safety. For safety reasons,
children under 16 as well as persons not familiar with these operating
instructions must not use the Pressure Sprayer. Never operate the
product when you are tired, ill or under the influence of alcohol, drugs
or medicine.
Keep these operating instructions in a safe place.
1. Area of application of your GARDENA Pressure Sprayer
Intended purpose:
The GARDENA Pressure Sprayer is intended for distributing solvent­free
liquid pesticides
1)
, herbicides
1)
, fertilisers
wax
1)
in domestic gardens and allotments. It must not be used in public
places, parks, sport arenas, or in agriculture or forestry.
Compliance with the operating instructions provided by the manu­
facturer is a prerequisite for using the Pressure Sprayer correctly.
1)
In accordance with the laws governing the use of pesticides and detergents, only authorised
substances may be used (authorised specialist shop).
Please note:
Due of the risk of physical injury, the GARDENA Pressure Sprayer
must not be used for spraying substances other than those specified
by GARDENA.
Also, no acids, disinfectants or impregnators, aggressive and solvent­
containing cleaning agents, petrol or spray oil may be sprayed.
We recommend that you only use pesticides approved by the BBA
(German Federal Biological Research Centre for Agriculture and
Forestry). To our knowledge at the time of manufacturing the unit, the
pesticides approved by the BBA will not damage the materials used to
construct the Pressure Sprayer.
When spraying insecticides, herbicides and fungicides or other liquid
plant protection products, you must comply with all special pre­
cautionary measures specified by the manufacturer of the product you
are using.
2. Safety instructions
Danger of physical injuries:
Never open the Pressure Sprayer or unscrew the nozzle when the
Pressure Sprayer is still pressurised. To prevent injury, never connect
the Pressure Sprayer to an air­compressor. Before pulling out the
safety valve
(Fig. A3), the sprayer always has to be placed vertically.
5
Before opening the sprayer, always release pressure completely by
pulling out the safety valve.
Danger! Small parts could be swallowed during assembly and there
is a risk of suffocation from the polybag. Keep infants away during
assembly.
Operation:
Inspect the Pressure Sprayer visually before each use. Never leave your
Pressure Sprayer unattended or for long periods when full and pres­
surised. Keep the unit out of the reach of children. You are responsible
for the safety of others. Keep your Pressure Sprayer away from heat
sources and hot environments. Screw handle
not use tools) and ensure the correct position of the O­ring
Cleaning:
Release the pressure after each use, empty the container, clean it
carefully, rinse it with clear water and clean the filter
pressure sprayer open and allow it to dry. Do not dispose of residual
fluids in the sewerage system (local disposal systems). Always clean the
Pressure Sprayer before using a different product to avoid chemical
reactions. When using several Pressure Sprayers, the tanks and handle
may not be exchanged between them.
Storage:
Before storing, loosen the tank cap and always empty your Pressure
Sprayer completely (also after cleaning with water). Store away from
frost. If you use the permanent lock
work very carefully. Never store your pressure sprayer with permanent
lock.
3. Assembly
A1 Mounting the spray tube
A2 Attaching the spray hose
A3 Attaching the spray hose
A4 Assemble shoulder straps
4. Operation
Please observe the safety and proportioning instructions provided by the
manufacturer of the product you are going to spray.
B1 Unscrew handle
and fill tank
7
WARNING: The tank may only be filled with a maximum of
5 litres liquid.
4
1)
, window cleaners
1)
, and car
on tightly by hand (do
7
(Fig. B1).
!
. Then leave the
D
(Fig. B3) pay attention that you
"
in the hand valve
.
1
2
to the hand valve
.
3
2
to the container cap
.
3
4
(Art. 828 has shoulder padding).
6
.
8
A3 Pump using the handle
7
B2 Set mist spray via the nozzle
B3 Press operating tab
and spray liquid.
0
5. Cleaning
Cleaning the Pressure Sprayer:
Always clean your Pressure Sprayer after spraying.
Use Pressure Sprayer only with clear water (possibly with addition of
dish detergent) and spray empty. The valves, the spray pipe
nozzle
and the filter
are cleaned. In the case of outer dirtying of
9
D
handle and tank, thoroughly clean the area thread and thread O­ring
We recommend that you have your Pressure Sprayer thoroughly
inspected (preferably at a GARDENA Service Centre) after using it
for 5 years.
6. Trouble­Shooting
C1 Cleaning the filter:
v Remove the filter
from the spray tube
$
Problem
Possible Cause
Pump does not
Safety valve
build up pressure.
loose.
Hose connection at
the container and
hand valve is not tight.
Continuous lock
enabled on handle.
Sealing cap
defective.
Pressure Sprayer
Nozzle
does not spray
although there is
Filter
$
sufficient pressure
or only sprays with
a weak spray jet.
It is difficult to
Container pressure
open and close the
too high.
container.
If you have any other problems with your Pressure Sprayer please
contact GARDENA Customer Service.
7. Putting into Storage
Storing your Pressure Sprayer::
1. Clean the Pressure Sprayer (refer to 5. Cleaning).
2. Keep your Pressure Sprayer in a place protected from frost.
8. Available accessories
GARDENA Weedkiller Cone
GARDENA Extension Lance
9. Technical data
Max. capacity
5 l (8 pints
approx.)
Spray tube length
36 cm
Hose length
175 cm
10. Warranty
In the event of a warranty claim, no charge is levied to you for the ser­
vices provided. GARDENA Manufacturing GmbH offers a two­year war­
ranty (effective as of the date of purchase) for this product. This warran­
ty includes all significant defects of the product that can be proved to be
material or manufacturing faults. This warranty is fulfilled by supplying a
fully functional replacement product or by repairing the faulty product
sent to us free of charge; we reserve the right to choose between these
options. This service is subject to the following provisions: The product
was used for its intended purpose as per the recommendations in the
operating instructions. Neither the purchaser nor a third party has
attempted to repair the product. This manufacturer's warranty does not
affect warranty entitlements against the dealer / retailer. If problems arise
with this product, please contact our Service department or send the
defective product along with a brief description of the fault to GARDENA
Manufacturing GmbH, making sure to have sufficiently covered any
shipping costs and to have followed the relevant postage and packaging
guidelines. A warranty claim must be accompanied by a copy of the
proof of purchase.
.
.
9
, the
1
and clean it.
1
Remedy
is
Tighten the safety
5
valve
.
5
Tighten the hose con­
nections at the con­
tainer and hand valve.
Release lock
"
"
handle.
dirty /
Clean or exchange
C
sealing cap
C
is blocked.
Unscrew nozzle
9
and clean.
is blocked.
Clean the filter
the spray tube.
Release the container
pressure completely
by means of the safety
valve
.
5
Prevents spray mist from
blowing away.
Art. No. 894
For extending the spray
tube.
Art. No. 897
Permissible working
pressure
Max. permissible
operating temperature
.
!
on
.
9
in
$
3 bar
40 °C