Gardena AccuJet Li-18 Operating Instructions Manual - Page 4
Browse online or download pdf Operating Instructions Manual for Blower Gardena AccuJet Li-18. Gardena AccuJet Li-18 16 pages. Accu blower
Also for Gardena AccuJet Li-18: Operating Instructions Manual (16 pages), Operator's Manual (10 pages), Operating Instructions Manual (18 pages), Operating Instructions Manual (17 pages), Operating Instructions Manual (17 pages)
Print Page
to battery charger, picking up or carrying the
tool. Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Do not overreach. Keep proper footing
and balance at all times. On slopes, be extra
careful and wear nonslip footwear. Do not
walk backwards while operating your prod
uct. Walk, never run. Do not use ladders while
operating the product. This enables better con-
trol of the power tool in unexpected situations.
e) Dress properly. Always wear suitable
clothing, gloves, and stout shoes.
Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
4) Power tool use and care
a) Only use the product in the manner and for
the functions described in these instructions.
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Always make sure your product is in a safe
operating condition before use. Do not use
the power tool if the switch does not turn it
on and off. Know how to stop the product
quickly in an emergency. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) The impeller continues to rotate after
your product has been switched off.
The motor must be stopped and the impeller
blade no longer turning to avoid serious injury
from the rotating blades.
d) Remove battery from unit:
– before leaving the product unattended for any
period;
– before clearing a blockage;
– before checking, cleaning or working on the
appliance;
– if the product starts to vibrate abnormally.
Check immediately. Excessive vibration can
cause injury.
– before passing to another person.
e) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
f) Maintain power tools. Check for misalign
ment or binding of moving parts, breakage of
parts and any other condition that may affect
16
the power tool's operation. If damaged, have
the power tool repaired before use. Keep all
cooling air inlets clear of debris.
Many accidents are caused by poorly maintained
power tools.
g) Use the power tool and accessories in
accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use the product only
in daylight or good artificial light. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger provided
with your unit and specified by the manufac
turer. A charger that is suitable for one type of
battery may create a risk of fire when used with
another battery.
b) Use power tools only with specifically
designated batteries. Use of any other batteries
may create a risk of injury and fire.
c) When battery is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another. Shorting the bat-
tery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Maintenance and storage
Have your power tool serviced by a qualified
repair person using only identical replace
ment parts. This will ensure that the safety of
the power tool is maintained.
– Keep all nuts, bolts and screws tight to be sure
the product is in a safe working condition.
– Replace worn or damaged parts for safety.
– Use only genuine replacement parts and
accessories.
– Store in a cool dry place and out of reach of
children. Do not store outdoors. The unit
must not be stored over 35 °C or under direct
exposure to sunlight. Do not store the unit in
places with static electricity.
Blower safety warnings
• Inspect the area before using the unit.
Remove all debris and hard objects such
as rocks, glass, wire, etc., that can ricochet,
be thrown, or otherwise cause injury or
damage during operation.