Alien ALR-F800 Wi-Fi Setup - Page 2

Browse online or download pdf Wi-Fi Setup for Card Reader Alien ALR-F800. Alien ALR-F800 6 pages.

Print Page
Alien ALR-F800 Wi-Fi Setup
General Setup Procedure
The general procedure to enable Wi-Fi functionality consists of the following steps:
1. install the ALR-F800 firmware v17.07.17 or later
2. plug in the compatible Wi-Fi USB adapter (from the list of supported devices below)
3. add a new Wi-Fi network configuration that includes at least the network SSID and
the password parameters
service wifi add "SSID"
service wifi set net 0 psk "PASSWORD"
NOTES
 in most cases make sure to use DOUBLE QUOTES around the SSID and the
PASSWORD values (use no quotes only when using hexadecimal values)
 several networks could be added to the reader Wi-Fi configuration, each with
its own set of parameters. Use a 0-based network ID/index when configuring
the specific network
4. start wifi service to connect to the WiFi network added above:
service wifi start
5. enable wifi service to automatically start WiFi interface on boot:
service wifi enable
ALR-F800 Wi-Fi Setup
APN-1046