A&I Products A-C2887G Installation Manual - Page 5

Browse online or download pdf Installation Manual for Tent A&I Products A-C2887G. A&I Products A-C2887G 5 pages. Canopy kit, compact utility tractor, aluminum tread plate

Print Page

The side mount plates are reversible to accommodate forward and rear angled ROPS. The side mount plates

are slotted, this will allow adjustment to level the canopy once installed. The orientation of the side mount

plates are shown below (the curved edge will match the angle of the ROPS).

Fig. 2

The side mount plates will mount directly to the canopy frame with the (4) 3/8" bolts and (4) 3/8" nuts.

There are multiple positions to attach the side plates to the frame, this is determined by the angle of the

ROPS and personal preference. If the ROPS angles forward, use holes toward the center of the canopy frame.

If the ROPS angles to the rear, use holes towards the rear of the canopy frame. These are recommended, but

can be adjusted based on operator preference.

Fig. 3

OMC2887

9/18/20