AlienPro ALPHA-S User Manual - Page 5

Browse online or download pdf User Manual for Lighting Equipment AlienPro ALPHA-S. AlienPro ALPHA-S 5 pages.

Print Page
Channel Instructions
Pattern
CH12
Size
Slow
CH13
Drawing
Scanning
CH14
Speed
Color
CH15
Speed
Strobe
CH16
Speed
DMX-512 connection
DMX In
First light (Address 001) Second light (Address 017) Third light(Address 033)
Press1,10
Dip switch and value
Dip
1 2 3 4
Switch
Value
1 2 4 8 16 32 64 128 256 DMX
w w w . a l i e n p r o . c o m . m x
Original size
Pattern size from small to big (
127
0~2
grade)
3~127
Pattern dynamic zoom from small to
128~169
big (41 grade)
170~211
Pattern dynamic zoom from big to
212~255
small (41 grade)
Pattern dynamic cycle zoom (
41
grade)
0~3
No function
4~255
Slow drawing speed (16 grade)
0~2
Default scanning speed (value:6)
3~255
252 grade scanning speed
0~255
256 grade(slow to fast)
9 grade strobe speed
（0-255）
0~255
/31=0~8(0 grade no flash)
To the fourth
Press1,5,10
Press1,6,10
5
6
7
8
9
4
DMX Address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will
receive channel control signals which from the starting address.
According to different requirements or easy to use, the user can set many value fixtures to the same
address, also can set up a separate address for every device.
If you set the same address,all the devices will receive from DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate control a device.
If you set a different address, each device will be separate from its particular set the starting address
and begin accepting DMX512 control signal, so that more convenient separate control one device.
Using this method must be based on channel quantity of device to determine a starting address.
This laser light has 16 channels.you should set the starting address of the first unit to 1, the second
unit to 17(1 + 16), the third unit to 33 (16*2+ 1), and so on.
DMX Address setting
10
w w w . a l i e n p r o . c o m . m x
5