a&p instruments UX 3081 Operating Instructions Manual - Page 14
Browse online or download pdf Operating Instructions Manual for Measuring Instruments a&p instruments UX 3081. a&p instruments UX 3081 20 pages. Moisture analysers
Print PageOperating instructions for moisture analysers
UX 3081
UX 3081WQ
Data interface
Weighing data, temperature and drying data are also shown on the display via a standard USB flash drive and
serial interface.
Depending on the model, a separate UX 3092 printer or a computer can be connected to the device.
Interface description
Model: V24 RS 232 serial data transmission and USB flash drive
Transmission rate:
9600 baud
Number of bits
8 data bits
1 stop bit
Parity check
none
Handshake
none
Data transmission using a USB flash drive
If the computer receiving the data has an internet connection, the system automatically installs a driver
and creates a COM interface, as soon as the computer is connected to the moisture analyser.
If this is not the case, the driver must be manually installed in the device manager.
Special software is required for transmitting data to a PC:
ULTRA X DataBridge
Data can be exported in four different data formats: . xls; .PDF.
The software is extremely easy to install and use:
Connect devices, place CD in PC, the installation is self-explanatory.
Accessories:
Stainless-steel drying tray
Tray tongs
Mains cable
Consumables:
Printing paper 58 mm
Aluminum foils 260 x 130
Foil press 230 x 110
Spare Parts:
Ceramic heater 250W
Ceramic heater 400W
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: [email protected], Internet: www.apinstruments.de
Order no.:
Application:
10000282
Sample containers (supplied)
10000230
for lifting the tray ( 2supplied)
H1000190
Mains connection (supplied)
10000234
for printer
H1000013
to protect the drying tray
10000063
to forming the aluminum foils
10000405
for 3081
10000318
for 2081WQ
Data cable
Moisture balance - DataChannel
1
2
3
4
5
5
4
3
2
1
6
7
8
9
9
8
7
6
ca. 2 m
Seite 14