A&S 800 User Manual - Page 13

Browse online or download pdf User Manual for Speaker System A&S 800. A&S 800 16 pages. Studio bar

Print Page

AUX / OPTICAL / COAXIAL / HDMI Operation

1 Ensure that the unit is connected to the TV or audio device.

2 Press the

button repeatedly on the unit or the SOURCE / HDMI buttons on the remote control to

select the AUX, OPTICAL, COAXIAL, HDMI 1, HDMI 2, HDMI ARC mode.

3 Operate your audio device directly for playback features.

4 Press the VOL +/– button to adjust the volume to your desired level.

Tip:

•

The unit may not be able to decode all digital audio formats from the input source. In this case, the

unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game

console, DVD player, etc.) is set to PCM or Dolby Digital (Refer to the user manual of the input source

device for its audio setting details) with HDMI 1 / HDMI 2 / HDMI ARC / OPTICAl / COAXIAL input.

When the DOLBY DIGITAL audio format is entered, the Soundbar display shows DOLBY AUDIO.

•

When the PCM audio format is entered, the Soundbar display shows PCM AUDIO.

•

When entering non-PCM or DOLBY DIGITAL audio formats, if there's no sound output from the unit

and the display show NO SUPPORT.

The first time you connect your bluetooth device to this player, you need to pair your device to this

player.

Note:

- The operational range between this player and a Bluetooth device is approximately 8 meters

(without any object between the Bluetooth device and the unit).

- Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.

- Compatibility with all Bluetooth devices is not guaranteed.

- Any obstacle between this unit and a Bluetooth device can reduce the operational range.

- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 During ON mode, press the

control to select Bluetooth mode. "NO BT" will show on the display if the unit is not paired to any

Bluetooth device.

2 Activate your Bluetooth device and select the search mode. "A&S 800" will appear on your Bluetooth

device list.

If you cannot find the unit, press and hold the

searchable. The display will show "PAIR" and you will hear "Pairing" from the unit.

3 Select "A&S 800" in the pairing list. After successful pairing, you will hear "Paired" from the unit, and

the display panel shows "BT".

4 Play music from the connected Bluetooth device.

button repeatedly on the unit or the SOURCE button on the remote

/ PAIR button on the remote control to be