Align-Pilates A2 Assembly Instructions Manual - Page 5

Browse online or download pdf Assembly Instructions Manual for Fitness Equipment Align-Pilates A2. Align-Pilates A2 16 pages. Full cadillac

Print Page

8. Attaching push through bar

Insert the push through bar onto the push through bar risers and use the nut and washer on each

side as per Fig.13 to attach the push through bar. At the head end, attach the horizontal eyelets

for the push through bar using the wrench and tighten securely, as per Fig.14.

Fig. 14

Fig. 13

9. Attaching the trapeze

To attach the trapeze to the runner, insert the eyelets through

the bar and tighten with the wrench securely as per Fig.15.

Now begin attaching the springs. Note: there is no set way to do this,

with the exception the black springs should be used to attach the

frame runner and the trapeze itself using karabiners. Where a spring

connects to the frame a karabiner should be employed, where the

spring connects to the push through bar, handles or roll down bar

please use a double ended dog clip.

Fig. 15

Please attach the safety strap for the push through bar, connecting to

the frame, looped over the bar and then connecting back onto itself. Ensure this is supporting the

bars weight before first use. Finally attach the 2 fuzzies to the top rail as shown in the cover pic-

ture. Congratulations!! You have now completed the assembly of your A2 Cadillac.