AEG 49669GO-MN User Manual - Page 14

Browse online or download pdf User Manual for Oven AEG 49669GO-MN. AEG 49669GO-MN 38 pages. 90cm

Print Page

UsING yoUr oVEN (coNtINUED)

Using your programmable controller to operate the oven

Model BE7900061M

Model 49669Go-MN

setting the time of day

after the appliance has been electrically connected the

"set clock" symbol

1 . to set the time of day in hours and minutes press the –

or +. 5 seconds after the last change the "timer arrow"

NOTE: The clock has a 24-hour display.

change the time of day (Daylight saving)

1 . switch off the appliance by pressing

2 . press "timer" as many times as necessary until the

"set clock" symbol

the clock display .

3. P ress "+" or "–" to change the time. 5 seconds after

the last change the "set clock" symbol

arrow

been set .

setting the oven function

1 . switch on the appliance by pressing the

oven lights will light .

2 . press the

desired function appears . the suggested cooking

temperature appears in the display and the degrees

symbol "°" flashes . If the suggested temperature

is not changed within approximately 5 seconds the

degrees symbol "°" stops flashing and the oven

begins to heat . the suggested temperature display

is replaced with the oven centre temperature and

a thermometer icon . the thermometer icon rises

slowly, indicating the degree to which the oven is

currently being heated .

programmable controler

will flash on the clock display .

will disappear, confirming the time has been set .

and "timer arrow

will disappear, confirming the time has

as many times as necessary until the

Gas hob burner controls

changing the oven temperature

1. P ress the – or +, to decrease or increase the

temperature .

NOTE: The temperature can only be adjusted when

the degrees symbol "°" is flashing. The temperature

setting changes in increments of 5°C. To change

the temperature after the degrees symbol "°" stops

flashing, press the

change the temperature.

setting the cooking time

1 . select the desired oven function and

flash on

cooking temperature .

2 . press the timer symbol

the "cook time" ❘➔❘ symbol appears .

and "timer

3 . set the desired cooking time by using the – or

+, whilst the "timer arrow" is flashing . after 5

seconds from the last time adjustment the "timer

arrow"

now programmed .

4 . when the set time has elapsed, a signal will sound .

. the

To stop the signal, press "+" or "–".

setting the stop time

1 . select the desired oven function and

cooking temperature .

2 . press the timer symbol

the "end time" ➔❘ symbol appears flashing .

3 . set the desired switch-off time using the – or

+ whilst the "timer arrow" is flashing . after 5