AEG 944 188 188 User Manual - Page 32

Browse online or download pdf User Manual for Oven AEG 944 188 188. AEG 944 188 188 36 pages.
Also for AEG 944 188 188: User Manual (32 pages)

Print Page

1. Product Description

www.aeg.com

Problem

The water in the cavity em-

bossment does not boil.

The water comes out of the

cavity embossment.

The appliance is activated

and does not heat up. The

fan does not operate. The

display shows "Demo".

11.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

Possible cause

The temperature is too low.

There is too much water in

the cavity embossment.

The demo mode is activa-

ted.

on the front frame of the appliance

cavity. Do not remove the rating plate

from the appliance cavity.

.........................................

Remedy

Set the temperature at least

to 110 °C.

Refer to "Hints and tips"

chapter.

Deactivate the oven and

make sure that the appliance

is cold. Wipe the water with

a cloth or sponge. Add the

correct amount of water to

the cavity embossment. Re-

fer to the specific procedure.

1. Deactivate the oven.

2. Press and hold at the

same time

3. The first digit on the dis-

play and Demo indicator

start to blink.

4. Enter the code 2468 by

turning the knob for the

temperature right or left

to change the values

and press

to confirm.

5. The next digit starts to

blink.

6. Demo mode deactivates

when you confirm the

last digit and the code is

correct.