Alinea ALN-LTM-2L2S-1M-00 Manual - Page 17
Browse online or download pdf Manual for Lifting Systems Alinea ALN-LTM-2L2S-1M-00. Alinea ALN-LTM-2L2S-1M-00 19 pages.
Print Page
● Anti-collision sensitivity adjustment - optional features:
a. Press and hold the "▲" "▼" button for 5 seconds at the same time to adjust the
sensitivity. Each press will activate one of 4 settings in order (A-3, A-2, A-1, A-0);
b. The display shows "
low sensitivity; Display shows "
sensitivity; (factory default is A-3);
c. During height adjustment, when tabletop comes in contact with another object, it
instantly stops and reverses to avoid damage.
d. Press and hold the "▲" "▼" button for 5 seconds at the same time. If the display
does not display the above code, there is no anti-collision function on your model.
● Troubleshooting:
a. Reset: When the LED shows"
lowest height and rebounds to stop, NOTHING must prevent desk from
reaching lowest level! Once at lowest level, desk will come up slightly and
display height. This means reset was successful.
b. If it doesn't work and the LED shows "E01" or "E02", please retry 18 mins later.
c. If the "▼" button does not work, cut off the power. Then check ALL the cable
connections thoroughly, then re-establish the power. Press "▼" button to re-start
the reset process when if it shows "ASF".
d.
If all these above processes are ineffective, please contact your dealer.
Waste disposal
", the anti-collision function is off; the display shows "
.
This marking indicates that this product should not be disposed with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling
", medium sensitivity; display shows "
", press "▼" button until the desk reaches its
",
", high