A-Champs ROX User Manual - Page 4

Browse online or download pdf User Manual for Fitness Electronics A-Champs ROX. A-Champs ROX 19 pages. Flash reflex reaction and cognitive training kit

Print Page

GET READY

1 · Download the A-CHAMPS ROX Pro App.

2 · Create an account and sign in to the App. Make sure to share your

training goals and objectives so that we can propose customized

content to you.

TURN ON ROX AND BLUETOOTH

1 · ROX will turn on automatically by taking them off the charging

base. ROX will be green for 10 seconds to indicate that it is on.

Or, To turn ROX on manually, find the power button on the ROX (at one

side), place the whole palm of your hand on the button, wait for the ROX

to flash green and only let loose once it vibrates. ROX will be green for

10 seconds to indicate that it is on. Repeat this with all ROX.

At any time, you can check if a ROX is on by tapping on it, it will flash

green and make a sound.

2 · Turn on the Bluetooth signal of your phone.

CONNECT ROX TO APP

3 · Go to SETUP, select ROX STATUS and then SYNC ROX.

4 · The screen will show all ROX that are found close by, tap each ROX

that you want to synchronize with the App. You can always go back to

these steps and sync more ROX.

5 · Navigate to EXPLORE to discover workouts and the drill library, or go

to CREATE to create your own drills or sessions.

HOW TO ACTIVATE THE TAP SENSOR

The best way to tap ROX is with the fingertips

in the middle of the white (ROX, ROXPro)/

transparent (ROXProX) hit area. It makes the

sensors inside ROX detect each interaction.

The default sensitivity settings of the ROX is

set on medium level, to allow best practice for

most use cases.

HOW TO CHANGE THE SENSITIVITY OF THE TAP SENSOR

If you want to change the sensitivity of the tap sensor, you can chose

from 12 different sensitivity levels through the App. Go to any of the

PROGRAMS, then MORE SETTINGS and HIT SENSITIVITY.

HOW TO ACTIVATE THE LASER SENSOR

(applicable for ROXProX)

Move your hand, foot or any other object or

body part right over the 2 "Fish eyes" on the

top of ROXProX. You can select different

distance settings through the App: Go to any

of the PROGRAMS, then MORE SETTINGS and

LASER DISTANCE.

HOW TO SET UP THE STRAPS

1 · Fix the silicone holsters to the straps as shown.

2 · Place ROX in the holsters and fasten the straps around different

objects. (e.g. boxing bag, fence, tree etc).

3 · Roll up the hanging end of the strap and fix it with the velcro.

HOW TO SET UP THE CLAW

1 · Chose the adapter that you want to use.

2 · Fix the adapter to the claw (see drawing).

3 · Place ROX into the claw, tap side outwards.

1 · Chose adapter

Velcro

Pole

Suction Cups

3 · Place ROX

2 · Fix adapter