Garmin D2 AIRX10 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Watch Garmin D2 AIRX10. Garmin D2 AIRX10 48 pages.

Print Page

Flying Activity

A flying activity starts automatically when your detected
climb rate exceeds the value you set in the auto fly
settings. The default auto fly value is 200 fpm.

Setting the Auto Fly Value

1 Hold
.
2 Select Activities & Apps > FLY.
3 Select the activity settings.
4 Select Auto Fly.
5 Select the auto fly value.
A flying activity starts automatically when your
detected climb rate exceeds this value.

Starting a Flight

1 Press
.
2 Select FLY.
3 Go outside to an area with a clear view of the sky, and
wait while the watch locates satellites.
4 Press
to start the flight timer.
NOTE: Your activity data is recorded only while the
flight timer is running.
5 Start your activity.
6 After you complete your activity, press
.

Viewing Your SpO2 Readings in Flight

The SpO2 readings are intended for backup information
only. Always defer to applicable flight instruments for
primary awareness.
The D2 Air X10 watch has a wrist-based pulse oximeter
to gauge the saturation of oxygen in your blood (SpO2).
Knowing your oxygen saturation can help you determine
how your body is adjusting to high altitudes. As your
altitude increases, the level of oxygen in your blood can
decrease. During a flight, the watch automatically takes
pulse oximeter readings more frequently, so you can
monitor your SpO2 percentage.
TIP: You can improve the accuracy of your SpO2 readings
by turning on all-day acclimation mode in the pulse
oximeter glance settings
Tracking Mode,
page 15).
1 Start a FLY activity.
2 Swipe up or down to scroll through the data screens.
Your most recent reading appears as an oxygen
saturation percentage.
NOTE: If you are too active for the watch to determine
your oxygen saturation, dashes appear instead of a
percentage. You should remain stationary for up to
30 seconds while the watch reads your blood oxygen
saturation.
Flying
, and select
WARNING
(Changing the Pulse Oximeter

Navigating to the Nearest Airport

1 Hold
.
2 Select
> Nearest.
3 If necessary, go outside to an area with a clear view of
the sky, and wait while the watch locates satellites.
A list of the nearest airports appears.
4 Select an airport.
5 Press
to start the flight timer.
NOTE: Your activity data is recorded only while the
flight timer is running.

Nearest Airports

Nearest airport identifier
Distance to the nearest airport
Bearing to the nearest airport

Navigating to an Aviation Waypoint by Its Identifier

You can navigate directly to an aviation waypoint by
searching for an alphanumeric identifier.
1 Hold
.
2 Select
> Enter Ident..
3 Enter all or part of the alphanumeric identifier.
4 Press
.
A list of matching waypoints appears.
5 Select the waypoint.
6 Go outside to an area with a clear view of the sky, and
wait while the watch locates satellites.
7 Press
to begin navigation.

Navigating Directly to a Saved Location

Before you can navigate to a saved location, your watch
must locate satellites.
1 Press
.
2 Select Navigate > Saved Locations.
3 Select a location, and select Direct-To.
4 Press
to start the flight timer.
3