Garmin D2 BRAVO TITANIUM Owner's Manual - Page 11
Browse online or download pdf Owner's Manual for Watch Garmin D2 BRAVO TITANIUM. Garmin D2 BRAVO TITANIUM 36 pages.
Print Page
• To suspend your activity and resume it at a later time,
select Resume Later.
Skiing
Going Cross-Country Skiing
Before you go skiing, you should charge the device
the Device, page
1).
1
From the clock, select START.
2
Select XC Ski.
3
Go outside, and wait while the device locates satellites.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
6
Select LAP to record laps (optional).
7
Select UP or DOWN to view additional data pages (optional).
8
After you complete your activity, select STOP > Save.
Going Downhill Skiing or Snowboarding
Before you go skiing or snowboarding, you should charge the
device
(Charging the Device, page
1
From the clock, select START.
2
Select Ski / Board.
3
Go outside, and wait while the device locates satellites.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
The auto run feature is turned on by default. This feature
automatically records new ski runs based on your movement.
The timer pauses when you stop moving downhill and when
you are on a chairlift. The timer remains paused during the
chairlift ride.
6
If necessary, start moving downhill to restart the timer.
7
Select UP or DOWN to view additional data pages (optional).
8
After you complete your activity, select STOP > Save.
Viewing Your Ski Runs
Your device records the details of each skiing or snowboarding
run. You can view run details from the paused screen or while
the timer is running.
1
Start a skiing or snowboarding activity.
2
Hold UP.
3
Select View Runs.
4
Select UP and DOWN to view details of your last run, your
current run, and your total runs.
The run screens include time, distance traveled, maximum
speed, average speed, and total descent.
Hiking
Going for a Hike
Before you go for a hike, you should charge the device
(Charging the Device, page
1
From the clock, select START.
2
Select Hike.
3
Go outside, and wait while the device locates satellites.
4
Select START to start the timer.
History is recorded only while the timer is running.
5
Start your activity.
The device records a track while you hike.
6
When you need to take a break or pause the device from
tracking, select STOP > Resume Later.
Activities
(Charging
1).
1).
The device saves the status of your hike and enters low
power mode.
7
Select START > Hike > Resume to resume tracking.
8
Select UP or DOWN to view additional data pages (optional).
9
After you complete your activity, select STOP > Save.
Running
Going for a Run
Before you go for a run, you should charge the device
the Device, page
1). Before you can use an ANT+ sensor for
your run, you must pair the sensor with your device
ANT+ Sensors, page
22).
1
Put on your ANT+ sensors, such as a foot pod or heart rate
monitor (optional).
2
From the clock, select START.
3
Select Run.
4
When using optional ANT+ sensors, wait while the device
connects to the sensors.
5
Go outside, and wait while the device locates satellites.
6
Select START to start the timer.
History is recorded only while the timer is running.
7
Start your activity.
8
Select LAP to record laps (optional).
9
Select UP or DOWN to view additional data pages (optional).
10
After you complete your activity, select STOP > Save.
Using the Metronome
The metronome feature plays tones at a steady rhythm to help
you improve your performance by training at a faster, slower, or
more consistent cadence.
1
Hold UP.
2
Select Settings > Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select Metronome > Status > On.
5
Select an option:
• Select Beats / Minute to enter a value based on the
cadence you want to maintain.
• Select Alert Frequency to customize the frequency of the
beats.
• Select Sounds to customize the metronome tone and
vibration.
6
If necessary, select Preview to listen to the metronome
feature before you run.
7
Hold DOWN to return to the clock.
8
Go for a run
(Going for a Run, page
The metronome starts automatically.
9
During your run, select UP or DOWN to view the metronome
screen.
10
If necessary, hold UP to change the metronome settings.
Biking
Going for a Ride
Before you go for a ride, you should charge the device
(Charging the Device, page
sensor for your ride, you must pair the sensor with your device
(Pairing ANT+ Sensors, page
1
Pair your ANT+ sensors, such as a heart rate monitor, speed
sensor, or cadence sensor (optional).
2
From the clock, select START.
(Pairing
7).
1). Before you can use an ANT+
22).
(Charging
7