Garmin D2 CHARLIE Owner's Manual - Page 32
Browse online or download pdf Owner's Manual for Watch Garmin D2 CHARLIE. Garmin D2 CHARLIE 48 pages.
Print Page
Marine: Sets the map to display data in marine mode
Map Settings, page
30).
Draw Segments: Shows or hides segments, as a colored line
on the map.
Routing Settings
You can change the routing settings to customize the way the
device calculates routes for each activity.
Hold UP, select Settings > Activities & Apps, select an
activity, select the activity settings, and select Routing.
Activity: Sets an activity for routing. The device calculates
routes optimized for the type of activity you are doing.
Courses: Sets how you navigate courses using the device. Use
the Follow Course option to navigate a course exactly as it
appears, without recalculating. Use the Use Map option to
navigate a course using routable maps, and recalculate the
route if you stray from the course.
Calculation Method: Sets the calculation method to minimize
the time, distance, or ascent in routes.
Avoidances: Sets the road or transportation types to avoid in
routes.
Type: Sets the behavior of the pointer that appears during direct
routing.
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1
Hold UP.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap.
6
Select an option:
• Select Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that displays
the time for that lap. The device also beeps or vibrates if audible
tones are turned on
(System Settings, page
If necessary, you can customize the data pages to display
additional lap data
(Customizing the Data Screens, page
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.
1
Hold UP.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap > Lap Alert.
6
Select a data field to change it.
7
Select Preview (optional).
Enabling Auto Pause
®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is helpful if
your activity includes stop lights or other places where you must
stop.
26
(Marine
NOTE: History is not recorded while the timer is stopped or
paused.
1
Hold UP.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Pause.
6
Select an option:
• To pause the timer automatically when you stop moving,
• To pause the timer automatically when your pace or
Enabling Auto Climb
You can use the auto climb feature to detect elevation changes
automatically. You can use it during activities such as climbing,
hiking, running, or biking.
1
Hold UP.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Climb > Status > On.
6
Select an option:
• Select Run Screen to identify which data screen appears
• Select Climb Screen to identify which data screen
• Select Invert Colors to reverse the display colors when
• Select Vertical Speed to set the rate of ascent over time.
• Select Mode Switch to set how quickly the device
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, climbing, navigating, hiking, running, or biking.
Turning On and Off the Lap Key
31).
You can turn on the Lap Key setting to record a lap or a rest
during an activity using BACK. You can turn off the Lap Key
25).
setting to avoid recording laps due to accidental key presses
during an activity.
1
Hold UP.
2
Select Settings > Activities & Apps.
3
Select an activity.
4
Select the activity settings.
5
Select Lap Key.
The lap key status changes to On or Off based on the current
setting.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
1
Hold UP.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
select When Stopped.
speed drops below a specified level, select Custom.
while running.
appears while climbing.
changing modes.
changes modes.
Customizing Your Device