Garmin fenix Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Watch Garmin fenix. Garmin fenix 18 pages. Turn on smart watch of 2022 - go wiki
Also for Garmin fenix: Getting Started Manual (4 pages), Owner's Manual (22 pages), Quick Start Manual (18 pages), Faq (5 pages), How-To (8 pages)

Print Page
Garmin fenix Owner's Manual
2
Select
.
3
Select
.
4
Select
.
NOTE: Your body temperature affects the temperature
sensor. To get the most accurate temperature reading,
remove the device from your wrist and wait 20–30 minutes.
TIP: To purchase a tempe™ wireless temperature sensor, go
to www.garmin.com. When you have the tempe paired with
the fēnix
(page
7), you automatically get accurate
temperature readings without having to remove the device
from your wrist.

Turning On a Sensor Mode

The default sensor mode is On Demand mode, which offers
you quick access to compass, altimeter, barometer, or
temperature data. You can also put the device in Always On
mode to display continuous sensor data. For example, you can
put the device in altimeter mode and continuously monitor
elevation data.
NOTE: If you have an optional heart rate monitor or speed and
cadence sensor paired with the device, your device can display
continuous heart rate or speed and cadence data.
1
Select the Orange key.
2
Select Setup > Sensors > Mode > Always On.
2

Acquiring Satellites

Before you can use the GPS navigation features, such as
recording a track, you must acquire satellite signals.
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position. To adjust the time settings, see
For more information about GPS, go to
/aboutGPS.
1
Hold
to turn on the device.
2
Select your language (first time only).
3
Select the Orange key.
4
Select Start GPS.
5
Wait while the device locates satellites.

Stopping GPS

1
Select the Orange key.
2
Select Stop GPS.

Going for a Hike

Before you go for a hike, you should charge the device
completely
(page
1).
NOTE: The device turns on automatically while charging. If you
do not charge the device before going for a hike, hold
on the device.
1
Select the Orange key.
2
Select Start GPS.
3
Wait while the device locates satellites.
4
Start hiking.
5
When you want to take a break or pause the device from
tracking, hold
> Pause Track.
6
Hold
> Resume Track, and continue hiking.
7
When finished, hold
data.
8
If necessary, select Yes to stop GPS.

Sending Your Hike to BaseCamp™

Before you can send data to BaseCamp, you must download
BaseCamp to your computer (www.garmin.com/basecamp).
You can view your hike, other tracks, and waypoints on your
computer.
1
Connect your device to your computer using the USB cable
(page
1).
Your device appears as a removable drive in My Computer
on Windows ® computers and as a mounted volume on
Mac ® computers.
2
Start BaseCamp.
3
Follow the on-screen instructions.

Profiles

Profiles are a collection of settings that optimize your device
based on how you are using it. For example, the settings and
views are different when you are using the device when hiking
than when mountain biking.
When you are using a profile and you change settings such as
data fields or units of measurement, the changes are saved
automatically as part of the profile.

Changing Profiles

When you change activities, you can quickly change the setup
of the handheld to suit the activity by changing the profile.
1
Select the Orange key.
2
Select Profiles.
page
6.
www.garmin.com
> Save Track to save your hiking
to turn
Introduction