Garmin FORERUNNER 935 Owner's Manual - Page 28

Browse online or download pdf Owner's Manual for Watch Garmin FORERUNNER 935. Garmin FORERUNNER 935 46 pages.
Also for Garmin FORERUNNER 935: Owner's Manual (42 pages)

Print Page

1. Keys

Select an option:

• Select Map to turn on or off the map.

• Select Guide to turn on or off the guide screen that

displays the compass bearing or course to follow while

navigating.

• Select Elevation Plot to turn on or off the elevation plot.

• Select a screen to add, remove, or customize.

Heading Settings

You can set the behavior of the pointer that appears when

navigating.

Hold

, and select Settings > Navigation > Type.

Bearing: Points in the direction of your destination.

Course: Shows your relationship to the course line leading to

the destination

(Course Pointer, page

Course Pointer

The course pointer is most useful when you are navigating to

your destination in a straight line, such as when you are

navigating on water. It can help you navigate back to the course

line when you go off-course to avoid obstacles or hazards.

The course pointer

indicates your relationship to the course

line leading to the destination. The course deviation indicator

(CDI)

provides the indication of drift (right or left) from the

course. The dots

tell you how far off course you are.

Setting Up a Heading Bug

You can set up a heading indicator to display on your data

pages while navigating. The indicator points to your target

heading.

Hold

Select Settings > Navigation > Heading Bug.

Setting Navigation Alerts

You can set alerts to help you navigate to your destination.

Hold

Select Settings > Navigation > Alerts.

Select an option:

• To set an alert for a specified distance from your final

destination, select Final Distance.

• To set an alert for the estimated time remaining until you

reach your final destination, select Final ETE.

• To set an alert when you stray from the course, select Off

Course.

If necessary, select Status to turn on the alert.

If necessary, enter a distance or time value, and select

ANT+ Sensors

Your device can be used with wireless ANT+ sensors. For more

information about compatibility and purchasing optional sensors,

go to http://buy.garmin.com.

Pairing ANT+ Sensors

Pairing is the connecting of ANT+ wireless sensors, for example,

connecting a heart rate monitor with your Garmin device. The

22).

first time you connect an ANT+ sensor to your device, you must

pair the device and sensor. After the initial pairing, the device

automatically connects to the sensor when you start your activity

and the sensor is active and within range.

NOTE: If your device was packaged with an ANT+ sensor, they

are already paired.

Install the sensor or put on the heart rate monitor.

Bring the device within 1 cm of the sensor, and wait while the

device connects to the sensor.

When the device detects the sensor, a message appears.

You can customize a data field to display sensor data.

If necessary, select

Accessories to manage ANT+ sensors.

Tips for Pairing ANT+ Accessories with Your Garmin

Device

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (33 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the ANT+

accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated. This

process occurs automatically when you turn on the Garmin

device and only takes a few seconds when the accessories

are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

Foot Pod

Your device is compatible with the foot pod. You can use the

foot pod to record pace and distance instead of using GPS when

you are training indoors or when your GPS signal is weak. The

foot pod is on standby and ready to send data (like the heart

rate monitor).

After 30 minutes of inactivity, the foot pod powers off to

conserve the battery. When the battery is low, a message

appears on your device. Approximately five hours of battery life

remain.

Going for a Run Using a Foot Pod

Before you go for a run, you must pair the foot pod with your

Forerunner device

(Pairing ANT+ Sensors, page

You can run indoors using a foot pod to record pace, distance,

and cadence. You can also run outdoors using a foot pod to

record cadence data with your GPS pace and distance.

Install your foot pod according to the accessory instructions.

Select a running activity.

Go for a run.

Foot Pod Calibration

The foot pod is self-calibrating. The accuracy of the speed and

distance data improves after a few outdoor runs using GPS.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS

signals and pair your device with the foot pod

Sensors, page

22).

The foot pod is self-calibrating, but you can improve the

accuracy of the speed and distance data with a few outdoor runs

using GPS.

Stand outside for 5 minutes with a clear view of the sky.

Start a running activity.

Run on a track without stopping for 10 minutes.

> Settings > Sensors and

22).

(Pairing ANT+

ANT+ Sensors