Garmin VIVOMOVE TREND Owner's Manual - Page 16
Browse online or download pdf Owner's Manual for Watch Garmin VIVOMOVE TREND. Garmin VIVOMOVE TREND 40 pages.
Print Page
Recording an Activity with Connected GPS
You can connect the watch to your phone to record GPS data for your walk, run, or bike activity.
1 Hold the touchscreen to view the menu.
2 Select
.
3 Select ,
,
, or .
4 If necessary, wait for the watch to acquire a GPS signal.
appears on the watch when you are connected to GPS.
NOTE: If you cannot connect the watch to your phone, select
recorded.
5 Double-tap the touchscreen to start the activity timer.
6 Start your activity.
Your phone must be in range during the activity.
7 After you complete your activity, double-tap the touchscreen to stop the activity timer.
8 Select an option:
• Select
to save the activity.
• Select
to delete the activity.
• Select
to resume the activity.
Recording a Strength Training Activity
You can record sets during a strength training activity. A set is multiple repetitions (reps) of a single move.
1 Hold the touchscreen to view the menu.
2 Select
>
.
3 If necessary, select
4 Double-tap the touchscreen to start the activity timer.
5 Start your first set.
The watch counts your reps.
6 Swipe to view additional data screens.
7 Select
to finish a set.
A rest timer appears.
8 During a rest, select an option:
• To view additional data screens, swipe the touchscreen.
• To edit your rep count, select
9 Select
to start your next set.
10 Repeat steps 6 through 9 until your activity is complete.
11 Double-tap the touchscreen to stop the activity timer.
12 Select an option:
• Select
to save the activity.
• Select
to delete the activity.
• Select
to resume the activity.
12
to turn on Rep Counting or Auto Set.
, swipe to select the number, and select
to continue the activity. GPS data will not be
.
Training