Garmin VIVOMOVE TREND Owner's Manual - Page 32

Browse online or download pdf Owner's Manual for Watch Garmin VIVOMOVE TREND. Garmin VIVOMOVE TREND 40 pages.

Print Page

Device Care

NOTICE

Avoid extreme shock and harsh treatment, because it can degrade the life of the product.

Do not use a sharp object to clean the device.

Never use a hard or sharp object to operate the touchscreen, or damage may result.

Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.

Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,

alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.

Do not place in high temperature environments, such as a clothes dryer.

Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause

permanent damage.

The watch is compatible with 20 mm wide, standard, quick-release bands.

1 Slide the quick-release pin on the spring bar to remove the band.

2 Insert one side of the spring bar for the new band into the watch.

3 Slide the quick-release pin, and align the spring bar with the opposite side of the watch.

4 Repeat steps 1 through 3 to change the other band.

The label for this watch is provided electronically. The e-label may provide regulatory information, such as

identification numbers provided by the FCC or regional compliance markings, as well as applicable product and

licensing information.

1 Hold the touchscreen to view the menu.

2 Select

> About > Regulatory.

Device Information