Garmin VOACTIVE 3 Owner's Manual - Page 28
Browse online or download pdf Owner's Manual for Watch Garmin VOACTIVE 3. Garmin VOACTIVE 3 34 pages.
Also for Garmin VOACTIVE 3: Owner's Manual (28 pages)
Print Page
Updating the Software Using Garmin Connect
Mobile
Before you can update your device software using the
Garmin Connect Mobile app, you must have a Garmin
Connect account, and you must pair the device with
a compatible smartphone
page 2)
.
Sync your device with the Garmin Connect Mobile
app (
(Using Garmin Connect Mobile, page 17)
When new software is available, the Garmin Connect
Mobile app automatically sends the update to
your device. The update is applied when you are
not actively using the device. When the update is
complete, your device restarts.
Updating the Software Using Garmin Express
1 Connect the device to your computer using the USB
cable.
When new software is available, the Garmin Express
application sends it to your device.
2 After the Garmin Express application finishes
sending the update, disconnect the device from your
computer.
Your device installs the update.
Viewing Device Information
You can view the unit ID, software version, regulatory
information, and license agreement.
1 Hold the touchscreen.
2 Select Settings > System > About.
Specifications
Battery type
Battery life
Operating
temperature range
Charging
temperature range
Wireless frequencies/
protocols
Water rating
*The device withstands pressure equivalent to a depth
of 50 m. For more information, go to
com/waterrating.
VÍVOACTIVE
3
®
(Pairing Your Smartphone,
Rechargeable, built-in lithium-
polymer battery
Up to 7 days in smartwatch
mode (with heart rate)
Up to 11 hr. in GPS mode
From -20º to 50ºC (from -4º to
122ºF)
From 0º to 45ºC (from 32º to
113ºF)
2.4 GHz @ 0dB nominal
ANT+ wireless communications
protocol
Bluetooth Smart wireless
technology
Swim, 5 ATM*
www.garmin.
Device Care
Avoid extreme shock and harsh treatment, because it
can degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the
.
touchscreen, or damage may result.
Avoid chemical cleaners, solvents, and insect repellents
that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after
exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure
to these substances can damage the case.
Do not store the device where prolonged exposure to
extreme temperatures can occur, because it can cause
permanent damage.
Cleaning the Device
Even small amounts of sweat or moisture can cause
corrosion of the electrical contacts when connected to
a charger.
Corrosion can prevent charging and data transfer.
1 Wipe the device using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to
fitandcare.
Replacing the Bands
The device is compatible with 20 mm wide bands. Go
to buy.garmin.com, or contact your Garmin dealer for
information about optional accessories.
1 Slide the quick-release pin
remove the band.
2 Insert one side of the spring bar for the new band
into the device.
3 Slide the quick-release pin, and align the spring bar
with the opposite side of the device.
4 Repeat steps 1 through 3 to replace the other band.
NOTICE
NOTICE
www.garmin.com/
①
on the spring bar to
23