Garmin 010-C0010-00 - MapSource BlueChart - Hecate Strait North User Manual - Page 12

Browse online or download pdf User Manual for Car Navigation system Garmin 010-C0010-00 - MapSource BlueChart - Hecate Strait North. Garmin 010-C0010-00 - MapSource BlueChart - Hecate Strait North 15 pages. Software de mapeamento
Also for Garmin 010-C0010-00 - MapSource BlueChart - Hecate Strait North: User Manual (24 pages), Owner's Manual (2 pages), User Manual (30 pages), User Manual (28 pages), (Portuguese) Manual Do Usuário (30 pages)

Print Page

Garmin 010-C0010-00 - MapSource BlueChart - Hecate Strait North User Manual

To Install a Garmin Data Card:

1. Insert the Data Card (Label up and pin connector end ﬁ rst) into the

card slot in the Programmer (standard USB Programmer pictured

to the right).

For the Mini-USB Programmer, make sure the Garmin

globe logo on the Programmer is facing UP for proper

orientation.

2. Be certain to install the Data Card completely into the slot to be

sure the pin connections have been made.

3. To remove the Data Card, pull directly away from the Programmer

using the extractor handle on the Data Card.

Use care not to remove the Data Card from the Program-

mer until data transfer has been completed to avoid pos-

sible loss of data.

Disconnecting the Programmer from Your Computer

After the USB Data Card Programmer has been successfully

installed (hardware and software), disconnecting and reconnecting the

Programmer can performed without additional installation steps.

1. Before disconnecting the Programmer, be certain that no data

transfer is in progress.

2. Unplug the USB connector from your computer. You do not need

to turn the computer off before removing or inserting the USB

connector.

Installation

Installing a Data Card in the

Programmer

Disconnecting the Programmer

from Your Computer

Extractor Handle