A-Collection 8948059 Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Indoor Furnishing A-Collection 8948059. A-Collection 8948059 20 pages. Mirror cabinet

A-Collection 8948059 Installation Instructions Manual
EN
Safety
Before using please ensure that all components and fixings are secure.
This luminaire has connection conductors with a nominal conductor area of Ø 2.5 mm² to 4.0 mm² which
can withstand a rated voltage of 400 V.
Do not place the mirror cabinet above a bath.
Do not place very hot or very cold items against or in close proximity to the mirror.
Do not strike the mirror with hard or pointed items.
Do not attempt to cut the mirror.
Make sure that the wall mounting furniture is mounted on the wall in a adequate manner.
Periodic structural checks of this product should be undertaken, do not use if you have any doubts its
fitness for purpose.
Do not let children play with this product.
Warning: this product should only be installed in zones 2 and 3 of a bathroom, in accordance with the
requirements of the local electrical installation standard. We suggest contacting a professional electrician
for all help. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively repla-
ced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. The
light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person. for wall hanging units :in order to prevent falling down this product must be used
with the wall attachment device provided.
Connection to the mains must be carried out by a qualified and authorized person, in accordance with
safety regulations.
Illuminates objects should be at a minimum 0.2m away from the luminaries.
Once installed the connecting cables should be neither visible, nor accessible, nor strained.
Replace any fissured safety screen on the luminaire when broken.
This product must not be modified; and modification may render it dangerous.
Always turn off the mains during installation or during maintenance. We recommend removing the fuse
or cutting of the circuit breaker at the electrical panel when works are underway. Turning off the lamp is
insufficient.
Always take into account the technical characteristics of the luminaire shown on the product label.
IM_Mirror cabinet Vivere II_A4_191014.indd 3
These instructions are for your safety.
Please read through them thoroughly prior to
installation and retain them for future reference.
Outside volume
Base: Floor of the
shower room
Installation volume
2019-10-14 13:16