Garmin BMW Motorrad Navigator VI Owner's Manual - Page 3
Browse online or download pdf Owner's Manual for Car Navigation system Garmin BMW Motorrad Navigator VI. Garmin BMW Motorrad Navigator VI 21 pages.
Print Page
Getting Started
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Contact Information
If you encounter any difficulty while using your BMW Navigator,
or if you have any questions, contact your BMW Motorrad
dealer.
Installing the Battery
1
Locate the screwdriver
2
Locate the lithium-ion battery in the product box.
3
Loosen the screws and remove the battery compartment
cover.
4
If necessary, insert a microSD
5
Insert the battery with its cable on top.
6
Insert the battery connector
7
Insert the battery cover, top side first
8
Close the battery cover
NOTE: Do not over-tighten the screws.
Getting Started
WARNING
that came in the product box.
™
card
into the device.
into the battery port
.
and tighten the screws.
Turning On the Device
NOTE: The device turns on automatically if it is in the optional
motorcycle or automotive mount and external power is
connected and turned on.
Press the power key.
Turning Off the Device
1
Hold the power key until a prompt appears on the screen.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
sleep mode.
2
Select Off.
Resetting the Device
You can reset your device if it stops functioning.
Hold the power key for 10 seconds.
Removing the Battery
You can remove the battery if you do not intend to use the
device for an extended period of time.
1
Loosen the screws and remove the battery compartment
cover.
2
Press and hold the release tab
and pull the connector away from the device
Installing Your Device in the Motorcycle
Mount
Before driving, ensure the top of the latch is flat and even with
the top of the device and the mount.
NOTE: The motorcycle mount is not included in all kits.
.
1
Insert the bottom of your device into the cradle.
2
Tilt your device back until it snaps into place and the top of
the latch is flush with the surrounding surface of the
motorcycle mount.
NOTE: Remove the device from the motorcycle mount before
connecting a battery charger to your motorcycle. To remove the
device, press the release button
About the Motorcycle Mount
You can access specific device features using the buttons on
the motorcycle mount.
NOTE: See the manuals included with your motorcycle for more
information about mounting options for your Navigator device.
on the battery connector
.
CAUTION
on the side of the mount.
1