Garmin GPSMAP 2006 Installation Manual - Page 5
Browse online or download pdf Installation Manual for Car Navigation system Garmin GPSMAP 2006. Garmin GPSMAP 2006 8 pages. Garmin gsd 20 marine-remote sounder: release note
Also for Garmin GPSMAP 2006: Installation Instructions Manual (12 pages), Declaration Of Conformity (1 pages), Install Manual (2 pages), Declaration Of Conformity (1 pages), Owner's Manual (20 pages)
Print Page
GPSMAP 2006 / 2010 / GPS 17N Installation Guide
Wiring
There are two wiring diagrams provided for you convenience. The fi rst is a simple hook-up showing the GPSMAP 2006/2010 (using
the 18-pin wiring harness), the GPS 17N and the alarm circuit. The Alarm does not have to be wired for the unit to function. The second
is a complete wiring diagram showing the GPSMAP 2006/2010 (using the 18-pin wiring harness) interfacing with a variety of different
equipment. The extra 5-pin wiring harness that came with the unit is intended for future interfacing features and does not require con-
nection. Refer to the wiring diagram that will best suite your needs. Make sure that all connections are good. For extra lengths of wire, 24
AWG (unless otherwise noted on wiring diagram), shielded, twisted-pair wiring is recommended. We advise soldering all connections and
sealing the connection with heat shrink tubing. If you experience diffi culty wiring the unit, please contact an installation professional in
your area.
GARMIN
GPSMAP 2006/2010
ACCESSORY ON
DC INPUT
ALARM
GROUND
PORT 4 OUT
PORT 4 IN
NOTE:
THE ALARM OUTPUT CAN BE USED TO DRIVE A LAMP, HORN, OR BOTH.
MAXIMUM CURRENT IS 100 MILLIAMPS. A SWITCH OR RELAY CAN BE USED
TO SELECT BETWEEN VISUAL AND AUDIBLE ALERTS, IF REQUIRED
WIRE
COLOR
ORANGE
5 A
18 AWG
RED
+
ALARM
SEE NOTE
-
YELLOW
18 AWG
BLACK
GREEN
WHITE
Diagram 1 - Basic Hook-up
1 A
SHIP'S BATTERY
10-32 VOLTS
GARMIN GPS 17
GPS SENSOR
WIRE
COLOR
YELLOW
ON
RED
POWER
BLACK
GROUND
COM 1 IN
BLUE
COM 1 OUT
WHITE