Garmin GPSMAP 2006 Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Car Navigation system Garmin GPSMAP 2006. Garmin GPSMAP 2006 20 pages. Garmin gsd 20 marine-remote sounder: release note
Also for Garmin GPSMAP 2006: Installation Instructions Manual (12 pages), Declaration Of Conformity (1 pages), Install Manual (2 pages), Declaration Of Conformity (1 pages), Installation Manual (8 pages)

Print Page

Activating the Simulator Mode:

1. Press the MENU key.

2. With the 'GPS Info' tab displayed, at the lower left of the display will be a SOFT KEY label 'Start Simula-

tor', press the SOFT KEY that corresponds with this option. Choose 'No' to the retail demonstration and

press ENTER/MARK . Press ENTER/MARK again to acknowledge the Running Simulator/Sonar Message.

3. The "Simulator Setup" window will be displayed.

There are seven parameters that can be set for the simulator: "Current Time", "Current Date", "Track

Control", "Track", "Speed", "Transducer" and "Set Position" (SOFT KEY). We need to change the "Current

Time" and "Current Date" settings.

There are two methods that you can use when entering alpha-numeric data, one is the

ARROW KEYPAD and the other is the DATA ENTRY keys. We will use the ARROW KEYPAD for set-

ting the Current Time and Current Date. See page 7 for instructions using the DATA ENTRY keys.

Current Time:

1. Using the ARROW KEYPAD , highlight the "Current Time" ﬁeld and press the ENTER/MARK key.

2. Using the Right/Left function of the ARROW KEYPAD , place the highlight on the correct digit to begin

entering the current time.

3. Using the Up/Down function of the ARROW KEYPAD , scroll through the list until the correct number is

displayed. Press the ARROW KEYPAD to the right to highlight the next digit.

4. Continue this process until the correct "Current Time" is displayed then press the ENTER/MARK key to

accept the new time.

Current Date:

1. Using the ARROW KEYPAD , highlight the "Current Date" ﬁeld and press the ENTER/MARK key.

2. Using the Right/Left function of the ARROW KEYPAD , place the highlight on the correct digit to begin

entering the Current Date.

3. Using the Up/Down function of the ARROW KEYPAD , scroll through the list until the correct number is

displayed. Press the ARROW KEYPAD to the right to highlight the next digit.

4. When the month is highlighted the Up/Down function of the ARROW KEYPAD will scroll through a list of

the months. Select the current month then move to the next digit.

5. Continue entering the date. When ﬁnished, press the ENTER/MARK key to accept the new date.

Getting Started

Using the Built-in Simulator

Main Page Sequence

Select this SOFT KEY to start the Simulator

After the 'Start Simulator' SOFT KEY has been pressed, the

"Simulator Setup" window will be displayed. Set the current

time and date, and change the "Track Control" to 'User Track'.

When ﬁnished press the QUIT key to begin simulation.