Garmin HUD Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Car Navigation system Garmin HUD. Garmin HUD 9 pages. Head-up display
Also for Garmin HUD: Owner's Manual (14 pages), Owner's Manual (6 pages)
Print Page
law or ordinance relating to the use of your
Garmin device.
Do not apply the film to a dry surface. If you
apply the film to a dry surface and try to remove
the bubbles, the film will be ruined.
NOTE: Before applying the film, test the location
with the device turned on. You cannot move the
film after it is applied and has dried.
You can use the included film to reflect the
display onto the windscreen.
1
Select a location to apply the film.
The film should be in the driver's view,
preferably in the center of the field of vision.
2
Clean and dry the windscreen with a lint-free
cloth.
3
Spray clean water on the windscreen.
The water enables the film to attach to the
window.
4
Pull the tab labeled 1 to remove the
protective layer from the adhesive side of
the film.
5
Apply the film to the window, with the
protective layer 2 facing out.
6
If necessary, move the film to the ideal
viewing location while the windscreen is still
wet.
7
Use a card to scrape the bubbles out to the
edge of the film.
Only remove the bubbles with the top layer
on the film.
The fewer bubbles in the film, the better the
view of the data.
8
Wait three to five days for the film to dry.
TIP: You can use the reflector lens while you
are waiting for the film to dry.
9
Pull the tab labeled 2 to remove the final
protective layer from the film.
3