Garmin NavComm SL30 User Manual - Page 14

Browse online or download pdf User Manual for Car Navigation system Garmin NavComm SL30. Garmin NavComm SL30 48 pages. Vhf transceiver
Also for Garmin NavComm SL30: Quick Reference Manual (2 pages), Installation (2 pages)

Print Page

Advanced Operation

1. While in Comm mode, press

display will show "store as" with a flashing cursor

at the first character of the name.

2. Turn the

3. Turn the

position.

4. After you turn the

past the fourth character, three underscores at the end

of the line will flash.

5. Turn the

6. Press

you do not want to save the frequency.

Removing a Comm channel

You may only remove channels stored in the User list.

1. In Comm mode, press

2. Turn the

SMALL

3. Press

the display.

4. Press

press

Changing or Replacing a Saved Comm Channel

Channels you have saved in the User list may be changed

or updated by replacing the frequency, but keeping the

same name and type.

1. Note the name of the channel you want to change. You

are going to use the same name and type for a new

channel.

2. Turn the

desired Standby frequency.

3. Press

"store as" with a flashing cursor at the first

character of the name.

119.10 s124.55

SMALL

knob to choose the desired character.

LARGE

knob to move to the next character

LARGE

SMALL

knob to choose the desired type.

ENT

after making your selections. Press

LARGE

knob to the User list and then turn the

knob to the desired channel.

SEL

. "Remove?" will flash on the right side of

119.10 s124.55

ENT

to remove the channel from the User list or

SEL

to exit without making changes.

LARGE

and

ENT

. The right side of the display will show

ENT

. The right side of the

store as _

knob one position clockwise

SEL

SLE ats Remove?

SMALL

knobs to display the

SEL