Brother 885-X03 Operation Manual - Page 7

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

WARNING

●

Use only regular household electricity for the power source. Using other power sources may

result in fire, electric shock, or damage to the machine.

●

Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and

the power supply jack on the machine.

●

Do not insert the plug on the power cord into an electrical outlet that is in poor condition.

●

Turn off the main power and remove the plug in the following circumstances:

• When you are away from the machine

• After using the machine

• When the power fails during use

• When the machine does not operate correctly due to a bad connection or a disconnection

• During electrical storms

CAUTION

●

Use only the power cord included with this machine.

●

Do not use extension cords or multi-plug adapters with many other appliances plugged in to

them. Fire or electric shock may result.

●

Do not touch the plug with wet hands. Electric shock may result.

●

When unplugging the machine, always turn off the main power first. Always grasp the plug to

remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric

shock.

●

Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,

or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These

things may damage the cord and cause fire or electric shock. If the cord or plug is damaged,

take the machine to your authorized dealer for repairs before continuing use.

●

Unplug the power cord if the machine is not to be used for a long period of time. Otherwise

a fire may result.

Connect the foot controller plug to the

1

machine.

Connect the power supply plug to a wall

2

outlet.

b

a

Note

● If a power outage occurs while the sewing

machine is being operated, turn off the main

power and unplug the power supply cord.

When restarting the sewing machine, follow

the necessary procedure to correctly operate

the machine.

(For U.S.A. only)

● This appliance has a polarized plug (one

blade wider than the other). To reduce the

risk of electric shock, this plug is intended to

fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse

the plug.

If it still does not fit, contact a qualified

electrician to install the proper outlet. Do

not modify the plug in any way.

1

6