Garmin Streetpilot C320 Quick Reference Manual - Page 3

Browse online or download pdf Quick Reference Manual for Car Navigation system Garmin Streetpilot C320. Garmin Streetpilot C320 19 pages. Streetpilot c320
Also for Garmin Streetpilot C320: Owner's Manual (37 pages), Setup Manual (4 pages), Safety And Product Information (32 pages), Product Information Sheet (2 pages), Quick Reference Manual (8 pages), Setup Manual (8 pages), Product Information (4 pages), Declaration Of Conformity (1 pages), Features (4 pages), Setup Manual (12 pages), Administrator's Manual (42 pages)

Print Page

Step 1: Conﬁgure Your c320

Press and hold the Power button

instructions to set up your c320. You only have to do this once.

Step 2: Install Software and Load Maps

Before using your c320, you need to install software on your computer using the DVD-

ROM. Then load maps on your c320. Refer to the Setup Guide for complete instructions.

Step 3: Mount Your c320

To ensure a tight grip, clean and dry your windshield.

Fit the bottom of your c320

into the cradle of the suction

cup mount.

Plug the cable into a receptacle in your vehicle. If necessary, use the tension knob to loosen

or tighten the tension in the mount to improve your viewing angle.

Your unit will turn on automatically if you have started your vehicle. To manually turn on

your c320, press and hold the Power button

WARNING: For use in vehicles, it is the sole responsibility of the owner/operator of a vehicle with the c320

installed to place and secure the device so it will not interfere with the vehicle operating controls and safety

devices, obstruct the driver's view of driving conditions, or cause personal injury in the event of an accident.

on the side of the unit to turn it on. Follow the on-screen

Tilt your c320 back until

it snaps in place.

on the side of the unit.

Tension knob

Place the suction cup on the

windshield. Flip the lever back,

toward the windshield.