Garmin 011-01257-00 Installation Manual - Page 9

Browse online or download pdf Installation Manual for Avionics Display Garmin 011-01257-00. Garmin 011-01257-00 47 pages.

Print Page

GENERAL DESCRIPTION

1.1

This manual presents mechanical and electrical installation requirements for installing the Garmin

GMA 1347D audio panel, as part of the Garmin Integrated Flight Deck. The GMA 1347D can be

incorporated into a variety of airframes under appropriate TC or STC. Each airframe installation may

vary. Use only approved (type or supplemental type) data for specific installation instructions in a

particular aircraft.

1.2

The Garmin GMA 1347D is a vertically oriented panel mounted audio control and marker beacon system.

The system delivers reliability and versatility for all audio controlling functions. LED-illuminated push

buttons and logical panel layout allow audio selection of NAV, COM, DME, ADF, MKR, TEL, AUX,

and automatic warning audio in voice or tone annunciation. LED brightness is adjusted to a level

appropriate for ambient cockpit light conditions automatically by the GDU or manually with radio

lighting controls, depending upon installation connections. A failsafe circuit connects the pilot's headset

and microphone directly to ON-SIDE COM in case power is interrupted or the unit is turned off.

The Garmin GMA 1347D Audio Panel incorporates a microcontroller for processing front panel key

commands, annunciator control, input/output functions, and communication.

The GMA 1347D includes a five-position intercom system (ICS) with electronic cabin noise de-emphasis

and two stereo music inputs. A dual installation extends the number of ICS positions to ten. The

intercom provides two selectable modes of isolation (Intercom ON, Intercom OFF). A pilot-selectable

cabin speaker output can be used to listen to the selected aircraft radios. The PA function is pilot

selectable and allows communication to the passengers.

The GMA 1347D provides configurable passenger volume and pilot adjustable master and ICS volume.

The GMA 1347D provides digital audio input/output capability to external radios. The unit is capable of

digitally interfacing with two transceivers and two receivers. For every channel except COM 3, the unit

generates both digital and analog outputs, and combines both digital and analog inputs.

The GMA 1347D provides a digital recorder with playback capability. Recording is selectable via the

REC button. Playback is controlled by pressing the PLAY button. The digital clearance recorder can

playback up to two and a half minutes of recording.

The marker beacon receiver with dual sensitivity and audio muting with automatic re-arming is included

in the unit.

The GMA 1347D (-20) includes a "CABIN" button, enabling cabin to cockpit communications.

GMA 1347D Installation Manual

190-00303-21

Page 1-1

Revision C