Garmin GNC 420 Quick Reference - Page 2

Browse online or download pdf Quick Reference for Avionics Display Garmin GNC 420. Garmin GNC 420 17 pages. 400/500 series gts 8xx interface
Also for Garmin GNC 420: Instructions Manual (6 pages), Pilot's Manual Addendum (27 pages), Pilot's Manual Addendum (4 pages), Quick Reference (23 pages), Pilot's Manual Addendum (22 pages), Pilot Operating Handbook (8 pages)

Print Page
Garmin GNC 420 Quick Reference
COM power/volume
COM flip-flop
Large left knob
Small left knob
k
The COM power/volume knob (
x
The large left knob (
) is used to tune the megahertz (MHz) value of the standby COM frequency for the transceiver.
v
The small left knob (
) is used to tune the kilohertz (kHz) value.
W
The COM flip-flop key (
) is used to swap the active and standby COM frequencies. Press and hold to select emergency channel (121.500 MHz).
R
The range key (
) allows you to select the desired map scale. Use the up arrow side of the key to zoom out or the down arrow side to zoom in.
D
The direct-to key (
) allows you to enter a destination waypoint and establish a direct course to the selected destination.
m
The menu key (
) displays a context-sensitive options list. The options list allows you to make settings changes which relate to the currently displayed page.
c
The clear key (
) is used to erase information or cancel an entry. Press and hold this key to immediately display the Default NAV Page.
E
The enter key (
) is used to approve an operation or complete data entry. It is also used to confirm information, such as during power on.
t
The large right knob (
) is used to select between the various page groups; NAV, WPT or AUX. With the on-screen cursor enabled, the large right knob allows
you to move the cursor about the page.
r
The small right knob (
) is used to select between the various pages within one of the groups listed above. Press this knob momentarily to display the on-screen
cursor. The cursor allows you to enter data and/or make a selection from a list of options.

KEYS AND KNOBS

) controls unit power and communications radio volume. Press momentarily to enable/disable automatic squelch control.
Range (map scale)
Direct-To
Clear
Large right knob
GNC 420
Menu
Enter
Small right knob