Garmin GNC 420 Pilot's Manual Addendum - Page 17
Browse online or download pdf Pilot's Manual Addendum for Avionics Display Garmin GNC 420. Garmin GNC 420 22 pages. 400/500 series gts 8xx interface
Also for Garmin GNC 420: Instructions Manual (6 pages), Pilot's Manual Addendum (27 pages), Pilot's Manual Addendum (4 pages), Quick Reference (17 pages), Quick Reference (23 pages), Pilot Operating Handbook (8 pages)
Print Page
1.13 CONfIGURING TRAffIC DATA ON THe MAP PAGe
Traffic is only displayed on the Map Page if aircraft heading data is available. The
Traffic Mode setting allows the operator to choose which traffic type is displayed (all
traffic, traffic and proximity advisories, or traffic advisories only). The Traffic Symbol
and Traffic Label settings determine the maximum ranges at which these items are
displayed.
Configuring traffic on the Map Page:
1)
Turn the small right knob to select the Map Page.
2)
Press the MENU Key to display the Page Menu.
3)
Turn the small right knob to select 'Setup Map?'.
4)
Press the ENT Key. The flashing cursor highlights the GROUP field.
5)
Turn the small right knob to select 'Traffic'.
6)
Press the ENT Key (Figure 9).
7)
Turn the large right knob to select the desired Traffic Mode option.
8)
Turn the small right knob to select the desired option.
9)
Press the ENT Key. Repeat steps 7-9 for Traffic Symbol and Traffic Label.
10) Return to the Map Page by pressing the CLR Key.
190-00140-78 Rev. A
Figure 9 Traffic Setup Menu
400/500 Pilot's Guide Addendum for GTS 8XX Interface
GTS 8XX Interface
11