Garmin GNS 430A Instructions Manual - Page 3

Browse online or download pdf Instructions Manual for Avionics Display Garmin GNS 430A. Garmin GNS 430A 6 pages. Friendlypanels gps for microsoft fs9 & fsx
Also for Garmin GNS 430A: Pilot's Manual Addendum (27 pages), Pilot's Manual Addendum (4 pages), Quick Reference (23 pages), Pilot's Manual Addendum (22 pages), Specification (2 pages), Operating Manual (27 pages)

Garmin GNS 430A Instructions Manual
To run the FDE Prediction Program:
1. With the 400/500 Series Trainer running, the simulated
in the upper left corner (Figure 2).
2. Select 'Fde Prediction Program'. The FDE Prediction Program window will appear (Figure 3), listing the fl ight plan waypoints and the
current time as the departure time.
3. To change the departure date, click on the down arrow adjacent to the 'Date (UTC)' fi eld. A calendar window appears. Click on the left
or right arrows to select a different month (if desired), then click on the desired date.
4. To change the departure time, click on the hours, minutes or seconds fi elds adjacent to the 'Time (UTC)' fi eld. Click on the up or down
arrows to change the displayed time.
5. To change the planned ground speed, route space or maximum allowed outage, click on the 'Setup button'. A setup window is
displayed (Figure 4). Click on the fi eld for the desired item, then enter the desired value.
NOTE: Although the Flight Setup window refers to Oceanic Phase of Flight, the prediction will be correct even when Route Space
of 1 or 2 NM is selected for U.S. RNAV routes, SIDs, or STARs.
190-00643-00 REV. A
400/500 unit
on, and the desired fl ight plan active, select the 'Options' menu
Figure 3. FDE Prediction Window
Figure 4. Flight Setup Window
Page 3