Garmin GNS 430A Quick Reference - Page 2
Browse online or download pdf Quick Reference for Avionics Display Garmin GNS 430A. Garmin GNS 430A 23 pages. Friendlypanels gps for microsoft fs9 & fsx
Also for Garmin GNS 430A: Instructions Manual (6 pages), Pilot's Manual Addendum (27 pages), Pilot's Manual Addendum (4 pages), Pilot's Manual Addendum (22 pages), Specification (2 pages), Operating Manual (27 pages)
Print Page
KEYS AND KNOBS
1
2
3
4
5
6
LEFT-HAND KEYS AND KNOBS
The COM Power/Volume Knob controls unit power
and communications radio volume. Press momentarily to
disable automatic squelch control.
The VLOC Volume Knob controls audio volume for
the selected VOR/Localizer frequency. Press momentarily
to enable/disable the ident tone.
The large left knob is used to tune the megahertz (MHz)
value of the standby frequency for the COM transceiver or
the VLOC receiver, whichever is currently selected by the
tuning cursor.
2
1
2
3
10
11
12
COM Power/Volume
7
VLOC Volume
8
COM Flip-flop
9
VLOC Flip-flop
10
CLR (clear)
11
Direct-to
12
GNS 430 Quick Reference
4
5
6
15
16
13
14
RNG (map range)
MENU
ENT (enter)
Small left knob
Large left knob
CDI
The small left knob is used to tune the kilohertz (kHz)
value of the standby frequency for the COM transceiver
or the VLOC receiver, whichever is currently selected by
the tuning cursor. Press this knob momentarily to toggle
the tuning cursor between the COM and VLOC frequency
fields.
The COM Flip-flop Key is used to swap the active
and standby COM frequencies. Press and hold to select
emergency channel (121.500 MHz).
The VLOC Flip-flop Key is used to swap the active
and standby VLOC frequencies (i.e., make the selected
standby frequency active).
7
8
9
17
18
OBS
13
MSG (message)
14
FPL (flight plan)
15
PROC (procedures)
16
Large right knob
17
Small right knob
18