Garmin GTN 6 series Instructions Manual - Page 10
Browse online or download pdf Instructions Manual for Avionics Display Garmin GTN 6 series. Garmin GTN 6 series 22 pages. Instructions for continued airworthiness for md 369e; md 369f; md 369ff
Also for Garmin GTN 6 series: Instructions Manual (24 pages)
Print Page
I
TEM
I
NTERVAL
2.6 Troubleshooting Information
If error indications are displayed on the GTN 6XX or 7XX, consult Section 4 (Troubleshooting) of
6XX/7XX PART 27 AML STC MAINTENANCE MANUAL
Checkout Log retained in the aircraft permanent records for a list of the interfaced equipment and system
configuration data.
2.7 Removal and Replacement Information
When replacing a GTN unit or GTN configuration module, the configuration information for the
replacement unit must be set based on approved installation data to ensure proper configuration for this
STC. In particular, per FAA direction, the setting for Airspace Labels must be configured as "Disable".
For removal and replacement instructions, refer to
MANUAL
Section 5, Equipment Removal and Replacement.
190-01007-KB Rev. 3
Instructions for Continued Airworthiness GTN 6XX/7XX - MD369E/F/FF
D
/P
ESCRIPTION
ROCEDURE
(c) If the aircraft skin is cracked, or deformed, the internal structure
must also be inspected for degradation in the local area. Refer to
approved method defined in MDHI Model Helicopters Models
369D/E/FF-500/600N Structural Repair Manual.
8. Verify that antenna fasteners are not loose.
. Refer to the GTN System Configuration and
GTN 6XX/7XX PART 27 AML STC MAINTENANCE
GTN
Page 7 of 19