Garmin ECHOMAP 70 Series Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Marine GPS System Garmin ECHOMAP 70 Series. Garmin ECHOMAP 70 Series 50 pages. Flat-mount kit
Also for Garmin ECHOMAP 70 Series: Owner's Manual (50 pages), Quick Start Manual (4 pages), Owner's Manual (38 pages), Owner's Manual (44 pages), Owner's Manual (30 pages), Installation Instructions Manual (6 pages), Installation Instructions (4 pages), Installation Instructions (4 pages), Installation Instructions Manual (34 pages)

Print Page

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select Settings > Other Vessels > AIS > Off.

All AIS functionality on all charts and 3D chart views is

disabled. This includes AIS vessel targeting and tracking,

collision alarms that result from AIS vessel targeting and

tracking, and the display of information about AIS vessels.

Chart and 3D Chart View Settings

NOTE: Not all settings apply to all charts and 3D chart views.

Some options require premium maps or connected accessories,

such as radar.

These settings apply to the charts and 3D chart views, except

the radar overlay and Fish Eye 3D

page

9).

From a chart or a 3D chart view, select Menu.

Waypoints & Tracks: See

the Charts and Chart Views, page

Other Vessels: See

Other Vessels Settings on the Charts and

Chart Views, page

Quickdraw Contours: Turns on bottom contour drawing, and

allows you to create fishing map labels.

Surface Radar: Shows surface radar details on the Perspective

3D or Mariner's Eye 3D chart views.

Weather Radar: Shows weather radar imaging on the

Perspective 3D or Mariner's Eye 3D chart views.

Navaids: Shows navigational aids on the Fishing chart.

Sailing: When in sailing mode, adjusts the laylines

Settings, page

8) and starting line guidance.

Chart Setup: See

Navigation and Fishing Chart Setup,

page

Overlay Numbers: See

Overlay Numbers Settings, page

This might appear in the Chart Setup menu.

Chart Appearance: See

Chart Appearance Settings, page

This might appear in the Chart Setup menu.

Navigation and Fishing Chart Setup

NOTE: Not all settings apply to all charts and 3D chart views.

Some settings require external accessories or applicable

premium charts.

From the Navigation chart or Fishing chart, select Menu > Chart

Setup.

Satellite Photos: Shows high-resolution satellite images on the

land or on both land and sea portions of the Navigation chart,

when certain premium maps are used

Imagery on the Navigation Chart, page

Water Overlay: Enables relief shading, which shows the

gradient of the bottom with shading, or sonar imagery, which

helps identify the density of the bottom. This feature is

available only with some premium maps.

Tides & Currents: Shows current station indicators and tide

station indicators on the chart

Indicators, page

5) and enables the tides and current slider,

which sets the time for which tides and currents are reported

on the map.

Roses: Shows a compass rose around your boat, indicating

compass direction oriented to the heading of the boat. A true

wind direction or apparent wind direction indicator appears if

the chartplotter is connected to a compatible marine wind

sensor. When in sailing mode, true and apparent wind are

shown on the wind rose.

Lake Level: Sets the present water level of the lake. This

feature is available only with some premium maps.

Overlay Numbers: See

Overlay Numbers Settings, page

(Fish Eye 3D Settings,

Waypoints and Tracks Settings on

(Laylines

(Showing Satellite

5).

(Showing Tides and Current

Weather: Sets which weather items are shown on the chart,

when the chartplotter is connected to a compatible weather

receiver with an active subscription. Requires a compatible,

connected antenna and an active subscription.

Chart Appearance: See

Waypoints and Tracks Settings on the Charts and

Chart Views

From a chart or a 3D chart view, select Menu > Waypoints &

Tracks.

Tracks: Shows tracks on the chart or 3D chart view.

Waypoints: Shows the list of waypoints

Waypoints, page

New Waypoint: Creates a new waypoint.

Waypoint Display: Sets how to display waypoints on the chart.

Active Tracks: Shows the active track options menu.

Saved Tracks: Shows the list of saved tracks

Saved Tracks, page

Tracks Display: Sets which tracks to display on the chart based

on track color.

Laylines Settings

To use the laylines features, you must connect a wind sensor to

the chartplotter.

When in sailing mode

can display laylines on the navigation chart. Laylines can be

very helpful when racing.

From the navigation chart, select Menu > Sailing > Laylines.

Display: Sets how the laylines and vessel appear on the chart,

and sets the length of the laylines.

Sailing Angle: Allows you to select how the device calculates

laylines. The Actual option calculates the laylines using the

measured wind angle from the wind sensor. The Manual

option calculates the laylines using manually entered

windward and leeward angles.

Tide Correction: Corrects the laylines based on the tide.

Overlay Numbers Settings

From a chart, 3D chart view, the Radar screen, or a

Combinations screen, select Menu > Overlay Numbers.

Edit Layout: Sets the layout of the data overlay, or data fields.

You can select the data to be shown within each data field.

Navigation Inset: Shows the navigation inset when the vessel

is navigating to a destination.

Navigation Inset Setup: Allows you to configure the navigation

inset to show Route Leg Details, and to control when the

inset appears before a turn or destination.

Compass Tape: Shows the compass tape data bar when the

vessel is navigating to a destination.

Editing the Data Fields

You can change the data shown in the overlay numbers

displayed on the charts and other screens.

From a screen that supports overlay numbers, select Menu.

If necessary, select Chart Setup.

Select Overlay Numbers > Edit Layout.

Select a layout.

Select a data field.

Select the type of data shown in the field.

Available data options vary based on the chartplotter and

network configuration.

Showing a Navigation Inset

You can control whether a navigation inset appears on some

chart views. The navigation inset is shown only when the boat is

navigating to a destination.

Chart Appearance Settings, page

(Viewing a List of all

11).

(Viewing a List of

14).

(Setting the Vessel Type, page

Charts and 3D Chart Views

2), you