Garmin ECHOMAP UHD2 9 SV Installation Instructions Manual - Page 2

Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin ECHOMAP UHD2 9 SV. Garmin ECHOMAP UHD2 9 SV 15 pages.

Print Page

Tools Needed

• Drill

• Drill bits

◦ Bail mount, fixed or swivel: 3 mm (

◦ Flush mount: 3 mm (

• #2 Phillips screwdriver

• Jigsaw or rotary tool (flush mount)

• File and sandpaper (flush mount)

• Marine sealant (optional)

You can mount the device using one of three methods.

Bail mount: You can mount the device using the bail mount, which allows you to tilt the device.

Swivel mount: You can mount the device using the swivel base and bail mount, which allows you to swivel and

tilt the device.

NOTE: The swivel base is not available for ECHOMAP UHD2 9 sv models.

Flush mount: You can mount the device in the dashboard, which provides a more integrated installation.

Before permanently installing any part of your device, you should plan the installation by determining the

location of the various components.

• The mounting location must provide a clear view of the screen and access to the keys on the device.

• The mounting location must be sturdy enough to support the device and the mount.

• The cables must be long enough to connect the components to each other and to power.

• To avoid interference with a magnetic compass, do not install the device closer to a compass than the

compass-safe distance value listed in the product specifications

in.) drill bit or drill bits appropriate for the surface and hardware

in.) and 12.7 mm (

in.) drill bits

(Specifications,

page 11).